Soft Bicolor Gradient Appearance The soft transition between two colors creates a vibrant and stunning visual effect on printed models. Display of Gradient Prints Gradient colors make it ideal for printing pretty toys or decorations. High Printing Speed with Delicate Finish Up to 300mm/s (with 0.4mm nozzle) printing speed while maintaining delicate and refined finish. 8 ~ 10 Meters Gradient Length Smaller models with less filament consumption will have a less noticeable gradient looks, while larger models with more filament consumption comes with a noticeable gradient looks. Excellent Layer Adhesion As new color options in the PLA Basic series, the gradient filament retains similar performance to PLA Basic while providing even stronger layer adhesion and toughness, reducing the risk of printed parts breaking. Z-layer Performance Layer Adhesion (Impact Strength - Z) Improved % Normal Matte PLA 6.6 kJ/m² 261% Bambu PLA Basic Gradient 23.8 kJ/m² Specimens：20*2*80 mm³ Accessory Compatibility Recommended Not Recommended Build Plate Cool Plate, High Temperature Plate or Textured PEI Plate Engineering Plate Hotend All Size / Material / Glue Bambu Liquid GlueGlue Stick / PLA Basic Gradient Hex Code Table Color Hex Code Display Arctic Whisper #9CDBD9; #FFFFF Solar Breeze #E94B3C; #FFFFFF Ocean to Meadow #307FE2; #54FF9B RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C，8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 - 230 °C Bed Temperature (with Glue) 35 - 45 °C Printing Speed < 300 mm/s Physical Properties Density 1.24 g/cm³ Vicat Softening Temperature 57 °C Heat Deflection Temperature 57 °C Melting Temperature 160 °C Melt Index 42.4 ± 3.5 g/10 min Mechanical Properties Tensile Strength 36 ± 2 MPa Breaking Elongation Rate 15.2 ± 0.5 % Bending Modulus 2270 ± 60 MPa Bending Strength 73 ± 3 MPa Impact Strength 61.2 ± 2.8 kJ/m² Downloads Filament TDS Filament MSDS Filament RoHS Printing Tips • PLA Basic Gradient is a new color options of PLA Basic series, please use the default PLA Basic setting for printing. To obtain higher printing quality, please set lower printing speed (layers speed and acceleration). • Gradient Length: 8 ~ 10 meters
