Hodr 4K UHD Projector: Excellence in High Ambient Light Environments Designed for Large Screens and High Ambient Light The Hodr 4K UHD Projector, part of the Theatre & Media Room Series, delivers a pleasingly calm and uniform image, making it ideal for large screens and high ambient light environments. With 4K UHD resolution (3,840 x 2,160) and 3-Chip DLP technology, Hodr provides up to 7,500 ANSI lumens of brightness, ensuring exceptional clarity and vividness. Exceptional Color Fidelity Supporting the DCI/P3 color gamut, Hodr delivers perfect cinematic colors. It offers a detailed and spectacular color fidelity that will delight even the most discerning clients. Single Step Processing (SSP™) Hodr features Barco's advanced Pulse electronics platform with Single Step Processing (SSP™). This hardware and software-based platform simplifies the signal transmission from source to screen, ensuring the lowest possible processing lag (90% Lens Range (R9801661) - TLD+ (0.41:1) - 90 Degree Lens(R9862001) - TLD+ (0.73 - 0.94:1) - 90 Degree Lens(R9801414) - TLD+ (0.92 - 1.33:1)(R9862005) - TLD+ (1.24 - 1.56:1)(R9862010) - TLD+ (1.49 - 2.02:1) *(R9862020) - TLD+ (2.01 - 2.76:1) *(R9862030) - TLD+ (2.69 - 4.41:1) *(R9862040) - TLD+ (4.37 - 7.35:1) (R9829997) - TLD+ (6.95 - 10.83:1) Standard Lens Option(s) Optical Lens Shift Up to 73% vertical lens shift & up to 28% horizontal lens shift (depending on lens selection) Optical Dowser Yes Color Correction P7 RealColor™ Color Gamut Up to DCI (P3) Image Processing Embedded Warp & Blend Engine WARP 4-Corner Warp & Bow Correction via Warp Engine Orientation 360° Rotation Network Connection 10/100 Ethernet via RJ45 connection Integrated Web Server Yes Diagnostics via Prospector web interface HDR HDR10 3D Active Stereoscopic 3DAdditional hardware required; please contact an authorized Barco representative for details Inputs 1 x HDMI 2.0 (HDCP 2.2)2 x HDBaseT (HDCP 1.4 - 9Gbps only)1 x Display Port 1.2Quad 3G / 12G SDI / BarcoLink1 x RJ45 Ethernet1 x RS2321 x USB2 x DMX (1 x Input / 1 x Output)1 x XLR for Wired Remote2 x 3D Sync (1 x Input / 1 x Output)Optional Upgrade: Quad DP1.2 Input Resolutions HDMI:Up to 4,096 x 2,160 @ 24/25/30/50/60HzDisplayPort (Single Input):Up to 4,096 x 2,160 @ 24/30/50/60Hzvia Optional Quad DP1.2 Input CardDisplayPort (Layout Mode: 2 x 2):Up to 1,920 x 1,080 @ 120HzUp to 2,048 x 1,080 @ 120HzDisplayPort (Layout Mode: 4 x 1):Up to 960 x 2,160 @ 120Hz* Specialist GFX cards may be required Latency TBD Control IR, RS232, IP, 12v TriggerDriver modules available for: Crestron, Control4, RTI & SavantWiFi (Optional), XLR Wired Remote, GSM (Optional) Power Requirements 110 - 130V / 200 - 240V / 50 - 60Hz Power Consumption 110V: 1,321W Max, measured in 20-25°C / 68-77°F230V: 1,256W Max, measured in 20-25°C / 68-77°FPower consumption will increase if ambient temperatures increase above 25°C / 77°F Noise Level 43 dB(A) (typical at 25°C/77°F) Operating Temperature 0 to 40 °C at Sea LevelOptimal Set Point: 20 °C Operational Humidity 0 to 80% (relative humidity) BTU per Hour Max. 4,288 BTU/h @ 200 - 240VMax. 4,516 BTU/h @ 110 - 130V Airflow Requirements Air Inlet (from Rear w/Feet Down): Front / Top / RightExhaust (from Rear w/Feet Down): RearClearance Requirements:Front: 40cmLeft: 1cmRight: 40cmRear: 40cmTop: 40cmExhaust airflow:152 ft³/min @ 25 °C258 m³/hour @ 25 °CDownload Lens & Airflow Data Here Dimensions (WxLxH) Excluding Lens540 x 725 x 355 mm21.26 x 28.54 x 14 in. Weight Excluding Lens48 kg / 105 lbs Shipping Dimensions Including Pallet - Excluding Lens (Packaged Separately)850 x 665 x 613 mm33.46 x 26.18 x 24.13 in Shipping Weight TBD Standard Accessories Power Cord, Remote Control Certifications CE, FCC Class A and cCSAus Safety Requirements This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 2.3 is installed.Refer to the installation manual for further information. Warranty Limited 3 years parts and laborExtendable up to 5 years*Firmware upgradablePlease contact an authorized Barco representative for details
