The TransPac is Dive Rite’s flagship harness, originally designed by CEO Lamar Hires for his early expeditions to the remote karst regions of Japan. He needed a rugged harness system that would allow him to utilize backmounted doubles and a single tank, as well as sidemount in some of the smaller passages. The TransPac is not only an incredibly versatile diving tool, it was also designed to be comfortable enough to hike tanks through thousands of feet of dry cave passage. Dive the TransPac Harness with a single tank, backmounted doubles, sidemount, or with a rebreather by simply swapping out the wing along with some additional mounting accessories. The TransPac is compatible with any wing in the Dive Rite line. Add accessories like gear pockets, weight pockets, a line cutter, knife, or additional D-rings with ease. Available in sizes small to XXL (including Large Short and XL Short options). When diving the TransPac XT Harness with backmounted doubles, you must use the TransPac Stabilizer Plates. Made in the USA. TECH SPECS Weight 4.25-5 pounds (2-2.25 kg) depending on size Backplate 1000 denier nylon fabric Webbing Size 2 in (50 mm). Rated at 7,000 pounds of breaking strength Hardware Material Marine-grade stainless steel D-Ring Size 2 in (50 mm) Cam Strap Dimensions 2 x 36 inches (5 x 91.4 cm) Crotch Strap Size 1.5 inches (3.8 cm) Quick-Release Buckles Material Acetal resin The Voyager Wing offers 35 pounds of lift, making it ideal for diving steel cylinders in warm water or heavier exposure protection in moderate temperature waters. Featuring an innovative 3D contoured design, these wings hug the cylinder closer than ever before, offering precise lift placement for improved trim underwater and optimized surface flotation. The Voyager Wing is made of a durable 1680 ballistic nylon material with SuperFabric® brand technology side panels for added protection and abrasion resistance. Available in the diver’s choice of rapid exhaust or elbow in 12, 16, or 22 inch lengths. This modular wing pairs seamlessly with the TransPac, TransPlate, or any other metal backplate and harness. Available in Black, OD Green, Blue, and Red. Made in the USA. TECH SPECS Weight 2.5 lbs (1.1 kg) Lift 35 lbs (15.9 kg) Dimensions 24.25 x 18.25 in (61.6 x 46.4 cm) Outer Bladder Material Durable 1680 denier ballistic nylon with SuperFabric® brand technology side panels Inner Bladder Material Heavy-duty, laminated 210 denier nylon The 20 lb Quick Buckle (QB) Weight Pockets are designed for secure and convenient weight management during your dive. Each pocket features an insert that releases easily when the handle is pulled, while the holster stays firmly on the waist belt. Holding up to 10 pounds per pocket, these versatile weight pockets can be mounted vertically or horizontally on 2-inch webbing, compatible with the TransPac Harness or similar systems. The two internal compartments keep weights stable, accommodating both soft and hard weights. With a tall, narrow design, these pockets free up waist space for other accessories, while a color Dive Rite logo identifies the right-hand pocket. Durable construction includes an acetyl quick buckle, nickel-plated brass grommets, and stainless slide for secure attachment. Made in the USA. TECH SPECS Capacity 10 lbs (4.5 kg) each Material 1680 Denier Ballistic Nylon
