1.6mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 300 mm)-bcnf-16m

MTI Online Store Verified independent store

→

Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (1m length x 300mm width x 1.6mm thickness) EQ-bcnf-16m Specifications Material: Nickel Foam, (excellen t anti-corrosive)Purity: > 99.9 wt % Impurity: C≤200S≤80Fe≤100Cu≤100Si≤50 ( ppm) Surface Density:346 g/m^2 Length: 1meter Width: 300mm Thickness: 1.6 mm Net weight: 104g Porosity: ≥95% (80-110 Pores per Inch. average hole diameters about 0.25mm) Extensibility: Lengthwise≥5%; Widthwise≥12% Tensile Strength Lengthwise ≥1.25N/mm^2; Widthwise≥1.00N/mm^2 Sold in roll only Notice: Please notice that it is normal to observe NiO peaks in the nickel foam in XRD data. It is really difficult to avoid the oxidation of nickel. How to clean the Nickel Foam for Battery Cathode Substrate. It can be removed the NiO by annealing in the hydrogen furnace. Nickel foam (about 3.3 cm x 1 cm) was carefully cleaned with the concentrated HCl solution (37 wt.%) in an ultrasound bath for 5 min in order to remove the surface oxide layer. And then deionized water and absolute ethanol was used for 5 min each to ensure the surface of the Ni foam was well cleaned. Porosity: ≥95% (80-110 Pores per Inch, average hole diameter is about 0.25mm Click the video above to see the battery cathode coated by MTI's Film coater MSK-AFA-II-VC Other Metallic Foams Related Product Battery Powders Heatable Ultrasonic Cleaner Electrode Coating Coin Cell Assembling Pouch Cell Assembling Cylinder Cell Assembling Electrolyte injection Show more