The Van Wife Components Multi-function Bed System is a versatile furniture system for your van that can create numerous configurations, including a platform bed, two bunks, couch, desk, or table. The entire system can be hung on the wall vertically (2 - per side) to open the entire back of the van. The system works by integrating adjustable panels that hang from themselves and from J-channel. Each panel has a thumb screw to be able to hold the panel in place while in use by fitting into the predrilled J-channel holes. Van Wife Components pre-drilled J-channel has holes spaced to be able to set the locking bolts in place and prevent sliding, as well as to create a stable back rest in couch mode. Each panel is 18" deep and adjusts from 60"- 72" wide. The J-channel is 75" long. For installation, please ensure that your walls are within these dimensions and are as parallel as possible to one another. J-channel needs to be supported adequately either through attachment to framing members or other bracing systems. While there are countless configurations, Van Wife Components typically recommends 4-panels and 3-sets of J-channel to create three mounting heights. This allows for the most configurations, including platform bed, bunks, table, couch, and desk configurations. Even in shorter vans, such as a Sprinter 144", the 4th panel will be used for bunks and as a storage shelf. 3-panels creates a 54" platform and 4-panels creates a 72" platform. Note: This system is not a seating solution for while the van is in motion and Van Wife Components does not recommend adding seatbelts or using this system while driving. Please secure all panels before driving and do not drive with any of our leg systems in place. Panels must be strapped in place if hung vertically while in motion.
Related
Related
Related
Related