Do you have trouble with parts warping or detaching from your printer bed - especially on your lithophanes and chromaphanes?Have you struggled with part removal after your print is finished?INTRODUCING LAYERNEER BED WELD! BED WELD is engineered to solve these challenges by enhancing your print surface. It grabs hold of that critical first layer when your build surface is hot and refuses to let go with its gecko-like grip. In many cases, you can print without rafts or brims, saving you time and material. THERMAL DYNAMIC COATING - Based on science, BED WELD works like magic; Parts stick at hot and release when cooled LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application. You can even spritz your plate with water and use BED WELD's sponge applicator to redistribute! With its staying power this adhesive only costs pennies per print LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water NO-MESS APPLICATOR - Built in foam tip makes applying the coating to your build plate surface simple and it won't accidentally spill Once your print finishes, let your bed cool to room temperature. As it cools, BED WELD releases its hold, so you don't have to wrestle to get your part off. Typically, your part will fully detach without needing tools.BED WELD comes with a unique applicator that makes applying the coating a simple no mess process. The coating dries quickly when the bed is heated. It forms a thin film that is "not sticky", yet parts will adhere well to it.Flexible magnetic sheets and textured PEI surfaces may appear to be flaky, but here at AF we still have flawless adhesion - even on our textured Bambu sheets! Works with PLA, PLA+, ABS, PETG, ASA, and CPE filaments. BED WELD is not recommended for use with Nylon, PP, or TPU 95A.PRINTING TIPS: When printing with ABS, we recommend setting your bed temperature no higher than 80C, and using an enclosure. NOTE: BED WELD was designed for use with heated build plates made from glass. Applying to glass build plates is preferred. Turn off printers "Economy" mode so your bed temperature remains stable throughout the print. 90-DAY GUARANTEE - If this solution does not work for your 3D printing application, you have a FULL 3 MONTHS to contact us for a 100% money-back refund
