Bedslide 1500 Contractor Cargo Slide | 79" x 48" | 1,500 lb Capacity | WeatherDeck | 75% Extension | Silver | 1999–Current Ford F-250 / F-350 Super Duty 6.9-Foot Bed | SKU: 15-7948-CG
Verified Fitment This slide fits the Ford F-250 Super Duty and Ford F-350 Super Duty with a 6.9-foot (short) bed, confirmed model years 1999 through current. The 79-inch platform w as built specifically for the Super Duty 6.9-foot bed interior introduced with the 1999 Super Duty platform. Pre-1999 F-250 and F-350 had a 6.5-foot bed — those applications take the 75" x 48" platform (15-7548-CG silver). Make Model Confirmed Years Bed Length Notes Ford F-250 Super Duty 1999–current 6.9 ft All cab configurations with 6.9' bed Ford F-350 Super Duty 1999–current 6.9 ft SRW confirmed — DRW see Field 3 Fitment is bed-length dependent. Engine, fuel type, drivetrain, and cab configuration do not restrict this fitment provided the bed measures 6.9 feet. Confirm bed length before ordering — Super Duty is also available with an 8-foot long bed (SKU 15-9548-CG silver). Verify fitment by text: (469) 407-7538 Does NOT Fit Exclusion Reason Correct Silver SKU Ford Super Duty 8-foot long bed Requires 95" x 48" platform 15-9548-CG Pre-1999 Ford F-250 / F-350 with 6.5-foot bed Pre-Super Duty F-250/F-350 6.5' bed requires 75" x 48" platform 15-7548-CG Ford F-150 (all years, all bed lengths) F-150 6.5' → 15-7548-CG; F-150 5.5' → 15-6548-CG; different platform sizes for all F-150 applications See F-150 silver fitment family F-350 DRW (dual rear wheel) Bedslide's application guide does not distinguish SRW vs. DRW for the Super Duty 6.9' bed. DRW rear axle width and wheel well intrusion may differ from SRW. Text (469) 407-7538 before ordering if your F-350 is a dually All other makes and models 79" x 48" platform is sized for the 1999+ Ford Super Duty 6.9-foot bed only Contact OFAS Trucks with spray-in or drop-in bedliners Installation over bedliners not recommended per Bedslide — liner removal or adjustment required — Ford Super Duty with aluminum bed components Some Super Duty configurations may include aluminum components — BSA-HALUMKT required if aluminum bed rails are present Purchase BSA-HALUMKT if applicable Buyers needing 1,000 lb capacity Classic tier on same 79" x 48" platform 10-7948-CLB (black — confirm silver Classic availability) Buyers needing 2,000 lb capacity Heavy Duty tier available on this platform 20-7948-HD (silver) Buyers needing full tailgate extension 75% extension is fixed in the Contractor tier Max Extension series Wheel or tire constraints No specific constraints confirmed in source data — confirm with installer — Trim-level production gaps No confirmed trim-level exclusions within 1999–current Super Duty year range — Verify fitment by text: (469) 407-7538 Component Specifications Component Specification Platform dimensions 79 inches x 48 inches Rated capacity 1,500 lb (evenly distributed static load) Extension 75% — approximately 59 inches of the 79-inch platform clears the tailgate plane Deck height above bed floor 4.5 inches Deck surface WeatherDeck composite — lightweight, all-weather durability Bearing configuration (2) cam-follower bearings, 3,282 lb static rating each (load-bearing end) + (2) sealed ball roller bearings (guide end) Locking interval Every 10–12 inches — locks in closed position and fully opened position D-ring tie-downs (4) D-ring tie-downs included via BedTrax T-slot system Grab bar Full-width grab bar — accessible from either side Locking positions Multiple locking positions for load security during transit Guardrails Full perimeter guardrail and headboard included Latch system Hard latch system BedTrax T-slots Included — compatible with Bedslide BedBin accessory ecosystem Finish Silver Edition Unit weight 200 lb Country of manufacture Made in USA Product series Bedslide 1500 Contractor What Is and Is NOT Included Included: Component Bedslide 15-7948-CG cargo slide platform (79" x 48") WeatherDeck composite deck surface Full perimeter guardrail and headboard Full-width grab bar BedTrax T-slot track system (4) D-ring tie-down anchors (2) cam-follower bearing assemblies + (2) sealed ball roller bearing assemblies Multiple-position hard latch system (locks every 10–12 inches) Standard installation hardware Not Included: Item Notes BSA-HALUMKT aluminum bed install kit Required if your Super Duty has aluminum bed rails or components. Prevents galvanic corrosion between steel slide frame and aluminum bed surface. Sold separately. Confirm bed material before ordering. BSA-SPACEBLKIT tailgate step clearance kit Required if slide does not clear the tailgate or truck has an integrated tailgate step. Sold separately. BedBin accessory system BedBin deck dividers, Mini Kix, Side Kix, and Upper Tray (48" and 58" versions) in both silver and black finish — attach via BedTrax T-slots, sold separately. No-drill mount kit No confirmed no-drill kit exists for the Super Duty 6.9-foot bed application. Drilling is required. Professional installation labor Dealer installation recommended — labor not included. Critical Compatibility System / Condition Interaction Action Required F-350 DRW rear axle Bedslide's application guide lists Super Duty 6.9' bed without SRW/DRW qualification. DRW rear axle width and wheel well profile may differ from SRW in ways that affect bed interior width at the mounting rail location. Text (469) 407-7538 before ordering if your F-350 is a dually. Super Duty aluminum bed components Most Super Duty trucks use steel beds, but some configurations may include aluminum components or rails. Steel slide frame in direct contact with aluminum surfaces causes galvanic corrosion. Confirm bed material before ordering. Purchase BSA-HALUMKT if aluminum contact is present. Tailgate with integrated step Super Duty tailgate step accessories may contact the slide when extended. Purchase BSA-SPACEBLKIT if clearance is insufficient. Test tailgate operation with slide extended before finalizing mount position. Spray-in / drop-in bedliners Installation over bedliners not recommended per Bedslide. Liner thickness and surface vary. Remove or modify liner before installation. Silver finish in heavy commercial environments Super Duty is a commercial platform. Silver shows surface contamination — mud, oil, construction debris — more visibly than black in daily high-grime use. No functional or warranty consequence — both finishes are structurally identical. Cosmetic consideration only. If appearance in a high-grime commercial environment matters, black (15-7948-CGB) may be more practical. Tonneau covers and truck caps No confirmed compatibility data. Cover clearance depends on profile and 4.5-inch deck height addition. Verify with your cover manufacturer before ordering. No confirmed electrical, ADAS, air suspension, or OEM technology system conflicts for this product. Installation Notes Complexity: Intermediate. Dealer installation recommended by Bedslide. Estimated time: Approximately 1 hour per Bedslide source data. Install method: Drilled mount. Four ½-inch holes required in the truck bed floor. Permanent bed modification. No confirmed no-drill kit exists for the Super Duty 6.9-foot bed application — the BSA-F150-2017 kit listed in Bedslide's accessories is for F-150 only and does not apply here. Required tools: Tool Required Drill Yes ½-inch drill bit Yes Riv nut tool Yes (included in hardware kit) ½-inch socket and ratchet Yes ½-inch open-end wrench Yes Allen wrench Yes Tape measure Yes Marker Yes What makes it complex: At 200 lb, two people are required for safe positioning. Drilling four ½-inch holes is permanent. Center between wheel wells and confirm 1.5-inch clearance at the bulkhead before marking holes. Do not use air impact tools on riv nuts — hand-install only. Confirm bed material before installing. If aluminum components are present, BSA-HALUMKT must be in place before mounting the slide. Bedliner presence requires removal or adjustment before install. Post-install: No alignment, calibration, or dealer visit required. Cycle under partial load and confirm all locking positions engage at correct intervals before full-load use. Shipping: 79-inch platform ships LTL freight. Residential delivery included. OFAS will contact you after order placement to coordinate delivery. Common Questions This is $287 less than the black version (15-7948-CGB). What's different?Bedslide's published pricing shows the silver Contractor at $1,834 vs. the black at $2,121 for an identical 79" x 48" platform, identical 1,500 lb capacity, identical 2+2 bearing configuration, and identical warranty. The price difference reflects Bedslide's own pricing structure between finish variants — there is no functional or structural difference. Silver delivers the same specs at a confirmed $287 lower cost. What years does this fit?The 1999 and newer Ford F-250 and F-350 Super Duty with the 6.9-foot bed. The Super Duty platform launched in 1999 — that's when the 6.9-foot bed and 79-inch interior dimension were introduced. Pre-1999 F-250 and F-350 had a 6.5-foot bed and take the 75" x 48" platform (15-7548-CG silver). My F-350 is a DRW dually — does this fit?Bedslide's application guide lists F-350 Super Duty 6.9' bed without specifying SRW or DRW. The concern with DRW is whether the dual rear axle's wheel well profile affects the bed interior at the slide's mounting rail location. OFAS cannot confirm DRW fitment from current source data. Text (469) 407-7538 with your year, model, and configuration before ordering. Does this require drilling?Yes — four ½-inch holes are required. No confirmed no-drill kit exists for the Super Duty 6.9-foot bed application. The F-150 no-drill kit (BSA-F150-2017) appears in Bedslide's suggested accessories for this page but is for F-150 applications only — it is not compatible with the Super Duty bed rail system. This is a permanent bed modification. Should I choose silver or black for a work Super Duty?The Super Duty is a commercial truck — if it goes to job sites with mud, oil, and construction debris daily, silver shows surface contamination more visibly than black. There is no structural or warranty difference between the two finishes. If appearance in a high-grime environment is a consideration, black is the more practical finish. If the $287 price difference is the priority and finish preference is neutral, silver delivers identical performance at lower cost. What is the warranty?5-year standard warranty. Lifetime warranty available upon product registration with Bedslide. Register immediately after installation. The Obsidian Take This slide is for the 1999-and-newer Ford F-250 or F-350 Super Duty contractor or commercial operator with a 6.9-foot bed who needs 1,500 lb capacity and either prefers silver finish or is working the price — at $287 less than the black sibling on identical specs, the case for silver is clear when finish preference is neutral or favorable to silver. It is not for the Super Duty operator running a high-grime commercial environment where daily loading of muddy equipment, oily tools, or construction materials makes silver surface contamination more visible than it's worth. In that use case, the $287 savings on finish is outweighed by the practical reality of maintaining appearance on a platform that will be loaded hard every day — the black version (15-7948-CGB) is the more pragmatic commercial choice. It is not for the F-150 owner — F-150 applications use different platform sizes. And it is not for buyers who need full tailgate extension or 2,000 lb capacity — those requirements have their own SKUs on this same Super Duty platform. The finish is silver. The specs are identical to the black version. The price is $287 lower. Make the decision based on your job environment and your budget — not on any performance difference between the two. Manufacturer Data Disclaimer Product images and data are manufacturer-provided for reference only. Actual product appearance, components, packaging, finishes, and fitment details may vary by application, part number, or manufacturer updates. Prop 65 Warning WARNING: This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov. Non-Returnable Notice This item is non-returnable once installed, drilled, assembled, or modified. Inspect the product before installation. Text (469) 407-7538 with your year, make, model, cab style, bed length, DRW/SRW status, and bedliner details before purchasing if you have fitment questions.
