Product Information BODE FREQUENCY SHIFTER 1630 Shift into high gear and get ready for that drop because the BODE FREQUENCY SHIFTER 1630 from Behringer is here! Expand your setup with an authentic recreation of the famous module from the ‘70s made with state-of-the-art circuitry including a voltage-controlled beat frequency quadrature oscillator. The BODE FREQUENCY SHIFTER just might be the piece you need to fill out that empty slot in your setup. Features Ready for Any Signal The BODE FREQUENCY SHIFTER accurately shifts the entire frequency spectrum of any input signal from -5 to +5 kHz. Simply plug in any audio source and start turning the giant knob to lower or raise the frequency. The amount of shift can also be varied with the Scale knob which lets you switch between linear or exponential control. Controls Additional controls on the BODE FREQUENCY SHIFTER include a variable threshold squelch which minimizes carrier bleed-through and can be used to creatively alter the input signal’s characteristics. Up to three control voltages can also plugged in, as well as up to four output signals. Specifications Inputs Signal Input Type: 1 x 3.5 mm TS jack, AC coupled Impedance: 50 kΩ, unbalanced Maximum input level: +12 dBu Control Inputs Type: 3 x 3.5 mm TS jack, DC coupled Impedance: 100 kΩ, unbalanced CV range: 10 V Outputs Outputs A Type: 2 x 3.5 mm TS jack, DC coupled Impedance: 1 kΩ, unbalanced Maximum output level: +12 dBu Output signal: None inverted frequency shift Outputs B Type: 2 x 3.5 mm TS jack, DC coupled Impedance: 1 kΩ, unbalanced Maximum output level: +12 dBu Output signal: Inverted frequency shift Mix outputs Type: 2 x 3.5 mm TS jack, DC coupled Impedance: 1 kΩ, unbalanced Maximum output level: +12 dBu Output signal: Output A or B or a mixture of both Test connector Type: 1 x 12 pin 0.1” male header Impedance: 1 kΩ, unbalanced Available signals: Var Osc, Fixed Osc 1&2, BFO filters 1&2, Dome filters 1&2, Out 1&2, Squelch enable link, GND Controls & Indicators Amount of shift: Frequency shift to a maximum of ±5 kHz Zero adjust: Fine frequency shift ±220 Hz Zero adjust LED: Flashes once per carrier cycle Scale rotary switch: 0 (off), Exponential +2 Hz to +2 kHz, 1 V/Octave Linear ±5 Hz, ±50 Hz, ±500 Hz, ±5 kHz Squelch threshold: -60 dBu to 0 dBu Squelch threshold LED: Lights for input signals above threshold level Mixture: Pans between the A and B outputs System Frequency range: 16 kHz Input to output gain: Unity gain Control input matching: Better than 0.1% Power Requirements Power supply: Eurorack Current draw: 110 mA (+12 V), 110 mA (-12 V)
Related
Related
Related
Related