BEV-LOC Beveled Laminate Countertop Edge The BEV-LOC edge is a classic beveled profile but reimagined. While beveled laminate countertop edges have been a staple for decades, ours stands apart. Rather than applying separate laminate pieces to each face, we use a single sheet of laminate with a precision miter fold, allowing the pattern to flow seamlessly from one face to the next with one fewer seam. Materials & Construction The BEV-LOC edge is built on an MR-50 moisture-resistant MDF substrate for lasting durability. High-Pressure Laminate (HPL) is bonded to the substrate using high-strength adhesive, and every piece is finished with clean 90-degree cuts on both ends. All materials are no- or low-VOC, and all surface and seam materials are waterproof. Dimensions & Profile Length: 12 feet* Height: 1 9/16 inches Thickness: 1/4 inch Face: 45-degree bevel Back: Flat mounting surface *For shipping, all 12-foot lengths are cut into two pieces: 94 3/4 inches + 47-inch off-fall. Ships in 8-foot tubes . Installation The BEV-LOC edge is DIY-friendly for anyone with basic carpentry skills. You'll need a miter saw (and optionally a disc sander) to cut and miter corners, no special blades required, as the MDF and laminate cut cleanly with standard equipment. Attach the edge using masking tape and a waterproof wood glue such as Titebond® III. Wipe away any squeeze-out with a damp rag. For a finishing touch, we recommend PROTECTALL™ Shine Plus which is an excellent wax treatment for both the edge and your laminate countertop surface. Warranty Gem State Edging warrants the BEV-LOC edge to the original owner against manufacturing defects for 10 years from the date of professional installation. At our discretion, defective product will be replaced at no charge. The warranty applies when the product is: (1) installed by a professional, (2) purchased for use in the Canada, (3) not moved from its original installation location, and (4) failed solely due to a manufacturing defect. It does not cover damage from excessive heat, physical or chemical abuse, or acts of nature. The warranty is non-transferable and covers replacement of the BEV-LOC edge only, it does not extend to labor, reinstallation materials, or any indirect, consequential, or incidental damages.
Related
Related
Related
Related