RE-VIEW is a powerful active polish, it effectively strips any glass contaminating films, water repellent coatings, hard water marks and mineral staining. Unlike other glass polishes RE-VIEW will remove these films even when used by hand. Machine use is also possible. Directions: Treat only cool glass surfaces, out of direct sunlight. Clean glass of loose particulate dirt. For every 30cm square of glass use approximately one pea-sized amount applied by a damp, soft cotton cloth or suede microfibre, work well into glass using small circular motions. Mist lightly with water occasionally if machine polishing or if treating larger areas of glass. Residue may be rinsed when still wet, or buffed easily away with a dry microfibre cloth once FULLY dried. Test that glass does not repel water on completion by atomising water onto the cleaned area. Fully cleaned and decontaminated glass will show a flat uniform film of water. Wipe dry after test. Precautions: Apply only on glass surfaces. Do not use on aftermarket or plastic tinted windows. Test at small scale on unusual glass finishes. Do not use on textured glass.
