Air Motor, A260 Manufacturer: Binks Part #: 104037 Description: Air Motor, A260 Specifications: Maximum air inlet pressure: 7 bar [101.5 psi] Maximum recommended continuous cycle rate [cycles/min]: 15 Maximum recommended intermittent cycle rate [cycles/min]: 30 Air inlet connection: 3/4" NPS / BSP FEMALE "A" REFERENCE Nominal pump stroke: 127mm [5"] Ambient temperature range: 0 - 71°C [0 - 160°F] Weight: 35kg [77lbs] Recommended Min. Internal Hose Diameter: Ø13mm Air Quality (ISO 8573.1, Class 3.3.2) Dirt: 5 µm Water: -20°C @7bar [0.1g/m³] Oil: 0.1 mg/m³ Thrust at 1 bar air pressure: 5.3 kN [1191 lbf] Ratio with 60 Fluid Section: 3.4:1 Ratio with 45 Fluid Section: 4.5:1 Ratio with 220 Fluid Section: 60:1 Ratio with 440 Fluid Section: 30:1 Ratio with 880 Fluid Section: 15:1 Ref. No. Part No. Description Qty 1 0114-014774 MINI BLOW-OFF VALVE, 8 BAR 1 2*+ 0115-010037 POPPET ASSEMBLY 2 3* 0115-010049 O-RING, Ø20 x 4 1 4*+ 0115-010051 O-RING, Ø4 x 2 4 5 0115-010341 CYLINDER, A260 1 6 0115-010346 PISTON, A260 1 7 0115-010348 LOCKNUT, M24 x 1.5 1 8* 0115-010351 PISTON SEAL 1 9 0115-010404 UPPER END CAP 1 10 0115-010405 LOWER END CAP 1 11 0115-010443 VALVE MUFFLER 2 12*+ 0115-010463 QEV PISTON 2 13 0115-010471 MAIN VALVE ASSEMBLY 1 14* 162765 O-RING VITON, Ø46 x 2 2 15*+ 162766 O-RING VITON, Ø13 x 2 2 16* 162768 O-RING VITON, Ø261 x 3 2 17 164838 RIVET 2 18 165100 SPRING WASHER, M16 1 19 165108 SPRING WASHER, M8 4 20 165567 CAP HEAD SCREW, M10x50 4 21 165981 DOME NUT, M14 10 22 165982 SPRING WASHER, M14 10 23+ 165991 M5 x 8 BUTTON HEAD CAP SCREW 4 24 165994 STUD, M8 4 25 177000 BUTTON HEAD CAP SCREW, M8 x12 2 26 192049 HEX NUT, M8 4 27 192147 NAMEPLATE 1 28 192509 SILENCER, 1.5" 1 29 193150 AIR MOTOR TIE ROD 5 30 193158 PISTON ROD 1 31 193159 EXHAUST MANIFOLD ASSEMBLY 1 32 193247 COVER PLATE 1 33* 193249 MOTOR ROD CARTRIDGE ASSEMBLY 1 34 193320 QEV CAP 2 35 193363 EXHAUST GASKET 2 36 193689 EYE BOLT, M16 1 NOTE: * - Parts included in the Air Motor Overhaul Kit 250645 + - Parts included in the Control Valve Kit 250647 Main Valve Assembly Parts List 0115-010471 Ref. No. Part No. Description Qty 50 0115-010456 MANIFOLD ASSEMBLY 1 51 0115-010454 VALVE BLOCK 1 52+ 0115-010424 SPOOL AND SLEEVE ASSEMBLY 1 53*+ 0115-010460 GASKET 1 54+ 0115-010431 SPACER 2 55+ 0115-010427 BUMPER 2 56+ 0115-010425 VALVE BLOCK END CAP 2 57+ 0115-010428 MAGNET 2 58*+ 162767 O-RING, Ø30 x 2 2 59+ 165990 CAP HEAD SCREW, M8 x 55 4 [52]* 162774 O-RING, Ø23.52 x 1.78 6 * - NOTE: Spool and sleeve assembly (52) is a matched set and cannot be interchanged with other spool and sleeve assemblies. * - Parts included in the Air Motor Overhaul Kit 250645 + - Parts included in the Control Valve Kit 250647 Accessories: Kluber Isoflex Topas NB 52 Grease AGMD-010 (50ml Tube) Mounting Bars 193264 (4 Required for Air Motor Wall Mounting) Literature: Manual Binks charges a significant fee to drop ship orders of less than $250.00. Therefore, any parts orders under $250.00 will be added to our stocking orders and then reshipped to you. If you need these products faster you can contact us for an expedited drop shipping fee. Contact: 503-545-3176
