A320 Air Motor Manufacturer: Binks Part #: 104038 Description: Air Motor Specifications: Maximum air inlet pressure: 7 bar [101.5 psi] Maximum recommended continuous cycle rate [cycles/min]: 15 Maximum recommended intermittent cycle rate [cycles/min]: 30 Air inlet connection: 3/4" NPS / BSP FEMALE "A" REFERENCE Nominal pump stroke: 127mm [5"] Ambient temperature range: 0 - 71°C [0 - 160°F] Recommended Min. Internal Hose Diameter: Ø13mm Air Quality (ISO 8573.1, Class 3.3.2) Dirt: 5 µm Water: -20°C @7bar [0.1g/m³] Oil: 0.1 mg/m³ Thrust at 1 bar air pressure: 8 kN [1191 lbf] Ratio with 440 Fluid Section: 46:1 Ratio with 880 Fluid Section: 23:1 Air Motor Assembly Parts List Ref. No. Part No. Description Qty 1 0114-014774 MINI BLOW-OFF VALVE, 8 BAR 1 2*+ 0115-010037 POPPET ASSEMBLY 2 3*+ 0115-010051 O-RING, Ø4 x 2 4 4 0115-010348 LOCKNUT, M24 x 1.5 1 5 0115-010443 VALVE MUFFLER 2 6*+ 0115-010463 QEV PISTON 2 7 0115-010471 MAIN VALVE ASSEMBLY 1 8* 162738 O-RING, Ø327 x Ø3 2 9* 162739 PISTON SEAL 1 10* 161451 O-RING, Ø23.47 x 2.62 1 11* 162765 O-RING, Ø46 x 2 2 12*+ 162766 O-RING, Ø13 x 2 2 13 164838 RIVET 2 14 165108 SPRING WASHER, M8 4 15 165567 CAP HEAD SCREW, M10 X 50 4 16 165981 DOME NUT, M14 12 17 165982 SPRING WASHER, M14 12 18+ 165991 BUTTON HEAD CAP SCREW, M5 x 8 4 19 165994 STUD, M8 4 20 177000 BUTTON HEAD CAP SCREW, M8x12 2 21 192049 HEX NUT, M8 4 22 192147 NAMEPLATE 1 23 193689 EYE BOLT, M16 1 24 192509 SILENCER, 1.5" 1 25 193150 AIR MOTOR TIE ROD 6 26 193159 EXHAUST MANIFOLD ASSEMBLY 1 27 193164 CYLINDER 1 28 193165 UPPER END CAP 1 29 193166 LOWER END CAP 1 30 193167 PISTON 1 31 193168 PISTON ROD 1 32 193169 WASHER, Ø60 1 33 193170 WASHER, Ø60 1 34 193247 COVER PLATE 1 35* 193249 MOTOR ROD CARTRIDGE ASSEMBLY 1 36 193320 QEV CAP 2 37 193363 EXHAUST GASKET 2 38 165100 SPRING WASHER, M16 1 NOTE: * - Parts included in the Air Motor Overhaul Kit 250682 + - Parts included in the Control Valve Kit 250647 Main Valve Assembly Parts List 0115-010471 Ref. No. Part No. Description Qty 50 0115-010456 MANIFOLD ASSEMBLY 1 51 0115-010454 VALVE BLOCK 1 52+ 0115-010424 SPOOL AND SLEEVE ASSEMBLY 1 53*+ 0115-010460 GASKET 1 54+ 0115-010431 SPACER 2 55+ 0115-010427 BUMPER 2 56+ 0115-010425 VALVE BLOCK END CAP 2 57+ 0115-010428 MAGNET 2 58*+ 162767 O-RING, Ø30 x 2 2 59+ 165990 CAP HEAD SCREW, M8 x 55 4 [52]* 162774 O-RING, Ø23.52 x 1.78 6 * - NOTE: Spool and sleeve assembly (52) is a matched set and cannot be interchanged with other spool and sleeve assemblies. * - Parts included in the Air Motor Overhaul Kit 250682 + - Parts included in the Control Valve Kit 250647 Accessories: Kluber Isoflex Topas NB 52 Grease AGMD-010 (50ml Tube) Mounting Bars 193264 (4 Required for Air Motor Wall Mounting) Literature: Installation Manual Binks charges a significant fee to drop ship orders of less than $250.00. Therefore, any parts orders under $250.00 will be added to our stocking orders and then reshipped to you. If you need these products faster you can contact us for an expedited drop shipping fee. Contact: 503-545-3176
