Binks PX1304 Pogo Low Pressure Pumps For High Volume Fluid Transfer & Spray Applications Manufacturer: Binks Part Number: PX1304 Description: PX1304 Pogo Pumps Pogo Plus series, two-ball, double acting piston pumps are designed for the application and transfer of low-medium viscosity fluids. Models are available in Stainless Steel with either PTFE or UHMWEpackings and are compatible with a wide variety of materials including water or solvent borne paints and adhesives and most solvents. Pogo Plus pumps have a 4:1 ratio and are available with maximum pressure ratings of 290 psi or 500 psi. Patented Air Motor Design —Utilize AX55 air motor to provide quick changeover and reduced pulsation Durable Pump Design—Reduces maintenance cost Pump Outfit Available with Trophy Gun—Trophy guns available with a new lightweight and ergonomic design 5 Year Limited Warranty—The finishing industry’s best warranty APPLICATIONS Furniture and Wood Cabinets Truck and Bus Adhesive Applications Coating Supply Solvent Supply for 2K Equipment General Industry Pump Performance PX1304-5U PX1304-5P PX1304-8U PX1304-8P Pressure Ratio: 4:1 4:1 4:1 4:1 Air Inlet Pressure: 0–72.5PSI (5) 0–72.5PSI (5) 0–116 PSI (8) 0–116 PSI (8) Fluid Pressure: 0–290 PSI (20) 0–290 PSI (20) 0–500 PSI (34) 0–500 PSI (34) Cycles Per Gallon: 47 47 47 47 Displacement Per Cycle: 2.7 (81cc) 2.7 (81cc) 2.7 (81cc) 2.7 (81cc) Flow @60 Cycles/Min: Maximum recommended continuous cycle rate: Maximum recommended intermittent cycle rate: Maximum Operating Temperature: Piston diameter: Nominal motor stroke: Air Inlet Connection: Outlet Size: Weight: 1.3 Gal (4.91 l/m) 20 cycles/min. [40 strokes] 40 cycles/min. [60 strokes] 160°F [71° C] 3.3 in (85 mm) 3 in [75 mm] 3/8" NPS/BSPP (female) 1/2" NPT(F) 12.6 Lb [5.7 Kg] 1.3 Gal (4.91 l/m) 20 cycles/min. [40 strokes] 40 cycles/min. [60 strokes] 160°F [71° C] 3.3 in (85 mm) 3 in [75 mm] 3/8" NPS/BSPP (female) 1/2" NPT (F) 12.6 Lb [5.7 Kg] 1.3 Gal (4.91 l/m) 20 cycles/min. [40 strokes] 40 cycles/min. [60 strokes] 160°F [71° C] 3.3 in (85 mm) 3 in [75 mm] 3/8" NPS/BSPP (female) 1/2" NPT (F) 12.6 Lb [5.7 Kg] 1.3 Gal (4.91 l/m) 20 cycles/min. [40 strokes] 40 cycles/min. [60 strokes] 160°F [71° C] 3.3 in (85 mm) 3 in [75 mm] 3/8" NPS/BSPP (female) 1/2" NPT (F) 12.6 Lb [5.7 Kg] Packing Material: UHMW PTFE UHMW PTFE Spray Finishing Outfits 98-3063 98-3062 Pump: PX13045U PX13045U Gun: Trophy Conventional 2465-18CN-11SO 2101-4308-2 Air Control: 41-28272 41-28272 Air Hose 25 Foot: 71-4803 71-4803 Fluid Hose 25 Foot: 71-3303 71-3303 Drum Bung Adapter: 41-28331 41-28331 Ref. No. Part No. Description Qty 1 0114-014351 HANDLE 1 2 0115-010272 RETAINING RING 2 3 0115-010001 SOCKET HEAD CAP SCREW 3 4 AX55S AX55S-5 AX55S AIR MOTOR (8 BAR) AX55S AIR MOTOR (5 BAR) 1 5 0115-010099 ROD CLIP 2 6 41-28326 41-28327 TIE ROD (6" OAL) TIE ROD (8" OAL) 3 7 41-28300 MOTOR ROD ADAPTER 1 8 PFX13P PFX13U POGO FLUID SECTION (PTFE) POGO FLUID SECTION (UHMW) 1 9 0114-016243 GROUND WIRE KIT 1 10 41-28347 UPPER GUARD 1 11 41-28348 LOWER GUARD 1 12 41-166001 SET SCREW 3 NOTE: Please measure the overall length of item 6, Tie Rod, to ensure the correct length. Literature: Manual Binks charges a significant fee to drop ship orders of less than $250.00. Therefore, any parts orders under $250.00 will be added to our stocking orders and then reshipped to you. If you need these products faster you can contact us for an expedited drop shipping fee. Contact: 503-545-3176
