The Blackmagic Design MultiDock 10G is an advanced SSD dock that lets you access 4x separate SSDs via a single high-speed 10 Gb/s USB‑C connection. Blackmagic MultiDock 10G has been specifically designed for the film and television industry and features a rack mount design with an independent SATA driver chip on each disk, ensuring much faster data transfer speeds. These features are ideal for editors, colorists, and media management on set. It can even be used for SSD compatibility on HyperDeck Extreme.Premium All Metal Rack Mount DesignThe MultiDock 10G is a compact 1 RU all-metal design and can be mounted in any professional rack. Each disk slot features an illuminated disk indicator, so you can see when disks are being accessed. The design is also repairable so you can replace the socket connector in each slot. Simply plug into any USB‑C Mac or Windows computer and thereIn addition, the rear panel features 2x USB‑C connections and a slide switch to allow selecting between using 4x disk slots on a single USB‑C connection, or 2x slots on each USB‑C connection for shared use. It has a built-in AC power supply that provides enough power to run 4x SSDs or hard disks at the same time.Extreme 10 Gb/s USB‑C SpeedThe MultiDock10G uses advanced USB‑C technology, so you get blazingly fast transfer speeds to your computer at up to 10 Gb/s with a single cable connection. That’s more than enough bandwidth to handle the highest resolution video formats including 8K in H.265 from HyperDeck Extreme 8K. The MultiDock features a completely independent disk interface chip per disk slot so you never get slowdowns because of SATA bandwidth issues. ‘Flexible RAID StorageUnlike consumer disk arrays, Blackmagic MultiDock is a compact and robust 1 rack unit all-metal design that can be quickly installed into equipment racks. The built-in power supply ensures no power is used from laptop batteries and it has enough power to run 4 high performance disks all at the same time for use in RAID configurations. Blackmagic MultiDock 10G even supports the RAID software built into most operating systems, so you can customize your disk array for your needs. Each disk slot also features an attractively illuminated disk access indicator so you can see when your disks are being accessed.Works with HyperDeck Extreme 8K HDRWhen you plug MultiDock into the HyperDeck External Disk port, it can see the SSD and use them for recording. When using 2 HyperDeck Extreme units mounted side by side it’s possible to switch to 2 channel mode and use 2 disks with each HyperDeck. This also means it's possible to use 2 computers with a single MultiDock, one using each channel, or multiple rack-mount servers that can access the same MultiDock. When an SSD is inserted in MultiDock, it can be seen on the HyperDeck Extreme on-screen menus and you can select it for record and playback.
