New for 2024: The Blinky Board, 4 Channel 2-6s LED Power Controller. 1.5amp for each channel. Multiple Blinking modes selectable via button or PINIO signal from flight controller or other digital 3-5v input. Features JST-SH 2 pin connectors for easy use of the EASY LED series of leds and cable sets. https://tinysleds.com/products/easyled-silicone-cable-kit-5x-200mm Use these with Easy LEDs, plug and play, or clip the wire and solder to your leds. Cop Mode, Chase mode, Left -Right Flash (Shown in video), Double Flash. Solid On, Off. Features The BlinkyBoard provides multiple LED animation modes: All LEDs On - Set all LEDs on All LEDs Off - Set all LEDs off Police/Ambulance Flash - Flashes LEDs in pairs (1,2 and 3,4) with a delay Double-Blink - Turns all LEDs on and off with delays for a double-blink effect Alternating 1,3 and 2,4 - Alternates between lighting LED1 & LED3, then LED2 & LED4 Chasing LEDs - Lights up LEDs sequentially with a delay between each Airplane Blink - Flashes the first two LEDs together, then the last two together Alternating 1,2 and 3,4 - Toggles LEDs in pairs (1,2 and 3,4) with a delay Random LEDs - Randomly turns on/off LEDs with varying delays Requires 5 volt to power circuit. Can be pulled off of FC to power. It is very small amount of power.
