The BLHeli32 project faced regulatory issues due to licensing concerns, leading to the removal of its configuration tool, with alternatives like BLHeliSuite32Test provided for ESC adjustments. Please download the tool from this link: BLHeliSuite32Test FC Description Introducing the BLITZ H7 Pro Flight Controller - a powerhouse with a dual-sided shielding design that not only protects against interference but also safeguards the controller from debris, ensuring seamless operation. The detachable shielding allows for easy TF card replacement. Upgraded with a robust STM32H743 MCU, it supports input voltages up to 12S and is compatible with ArduPilot firmware, offering customers endless possibilities. Upgrade to the BLITZ H7 Pro for unparalleled performance. FC Features Features 35x35mm mounting holes, providing a larger size for optimized flight controller PCB wiring. GH1.25 connector design enhances terminal connection reliability and ensures easy assembly. Utilizes an SD card for the flight controller's black box, offering increased capacity to record more flight data. Dual-sided shielding design offers interference protection and safeguards the flight controller from foreign object malfunctions. Removable expansion soldering pad board enables advanced users to easily connect additional peripherals. Incorporates a high-voltage DC-DC buck converter with a chip voltage endurance of up to 100V, delivering stable and reliable voltage for the flight controller and video transmission. Supports Betaflight and Ardupilot firmware. FC Specifications Product Name: BLITZ H7 Pro Flight Controller MCU: STM32H743 Gyro: ICM42688 Baro: DPS310 OSD: AT7456E Input Voltage: 14.8V-50.4V (4S-12S LIPO) Blackbox: SD Card UARTS: 7 Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Mount pattern: 35*35mm/φ4 Dimensions: 42*42*11.3mm Weight: 20g BEC: 5V 3A,12V 2.5A BF Firmware target: IFLIGHT_BLITZ_H7_PRO (BF4.4.2) Ardupilot Firmware: BlitzH743Pro FC Wiring Suggestion UART1 for VTX HD/Analog UART2 for Receiver UART4 for GPS UART5 for ESC Telemetry 8×Dshot/PWM outputs 2×I2C for GPS Mag ESC Description The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V. The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ, ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz, combined with a three-in-one driver IC, achieves a faster running speed! ESC Features Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection G071 MCU, 48mHz maximum clock speed; TDK MLCC Low ESR ceramic capacitors; Top grade PSMN1R0-40YLD MOSFET; 8 layers double-sided PCB board ESC Specifications Product Name: BLITZ E80 4-IN-1 ESC Input Voltage: 2-8S Max. Continuous Current: 80A Max. Burst Current: 100A MCU: G071 BEC: No Firmware: BLHeli32 Current Sensor: Yes Telemetry: Supported Target: IFLIGHT_BLITZ_G2 Mounting Dimensions: 35x35mm/Φ3mm Dimensions: 35x42mm Weight: 65g(±10) Protocal:Supports DShot DShot150/300/600/MultiShot/ OneShot etc Packing List 1 x BLITZ H7 Pro Flight Controller 1 or 2 x BLITZ E80 4-IN-1 ESC 1 x 50V 470UF capacitor Plate 2 x 50V 1000UF capacitor 1 x Wiring set 1 x USB Adapter Board Downloads BLITZ H7 Pro FC lnstructions BLHeli32SuiteTest BLITZ E80 4in1 ESC Instructions
