The Blizzard SN-80C is a self-contained crescent ice maker that delivers up to 95 kg of ice per 24 hours with approximately 40 kg of bin storage, sized for cafes, bars and small-to-mid venues. It uses R404A refrigerant, an air/water-capable condenser and a sliding-door bin, running on a standard 240 V / 10 A supply. Why operators choose the SN-80C Up to 95 kg crescent ice per 24 h — steady supply for cafes, bars and service counters Approx. 40 kg bin behind a sliding door — easy scooping with minimal cold loss R404A refrigerant — efficient, reliable cooling for continuous operation 13 x 30 x 35 mm crescent cubes — clear, slow-melting ice for drinks and displays Air/water condenser capability — flexible installation to suit the site Compact freestanding footprint — fits tight back-bar and prep areas Specifications Brand Blizzard Model / MPN SN-80C Type Self-Contained Ice Maker Ice production Up to 95 kg / 24h Bin storage Approx. 40 kg Ice type 13 x 30 x 35 mm crescent Refrigerant R404A Cooling Air / water condenser Door Sliding door Power 240 V; 770 W; 10 A Product dimensions 650(W) x 651(D) x 1063(H)mm Packed dimensions 750(W) x 740(D) x 1030(H)mm Net weight 61 kg Exterior material Steel Country of origin China Warranty 2 Years Parts and Labour Venue suitability: The SN-80C fits cafes, espresso bars, small restaurants and boutique hotels that need a dependable crescent-ice supply without a full-size machine. Its compact freestanding body (1063mm tall) suits tight back-of-house spaces; for continuous heavy demand, step up to a higher-output model. See more Self Contained Ice Makers or explore the wider Blizzard range to find the right output for your venue. Installation & delivery: Runs on a standard 240 V / 10 A power point and needs a mains water inlet and drain; the condenser can be air or water configured. Backed by a 2 Years Parts and Labour warranty. Dispatched Australia-wide. Frequently asked questions What type of ice does the SN-80C make? It produces 13 x 30 x 35 mm crescent cubes — clear and slow-melting, ideal for drinks service and cold displays. How much ice can it store? The sliding-door bin holds approximately 40 kg, giving a useful buffer for cafe and bar service. What refrigerant does it use? The SN-80C uses R404A refrigerant with an air/water-capable condenser. What power and plumbing does it need? A standard 240 V / 10 A supply plus a mains water inlet and drain connection. What warranty is included? The SN-80C is covered by a 2 Years Parts and Labour warranty. 2 Years Parts and Labour Warranty All Ice machines MUST be maintained to ensure high performance.The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.This maintains the quality of the ice shape and thickness. This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance. If your ice machine is not maintained, your warranty may be void. 6 Monthly Maintenance Program Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler. Sanitise water reservoir, distribution tubes, and bin interior. Clean and flush condenser coils (air-cooled units). Inspect condenser fan motor and blades. Check inlet water valve, float, and filters for correct operation. Verify ice thickness probe or sensor calibration. Inspect refrigerant pressures, superheat, and subcooling – adjust if necessary. Test compressor amperage and general performance. Inspect water pump operation and clean pump housing. Check harvest cycle operation (heater or hot gas valve). Inspect electrical connections, relays, and contactors. Replace inline water filter cartridge.
