The BLSTR sander is a handheld electric sandblaster. An electric motor drives a ceramic blast wheel at 18,000 RPM, throwing abrasive from an attached bottle straight at the surface — so you get real blasting action without a compressor, a blast pot or air hoses. Strip paint. Remove rust. Work into corners, mouldings and profiles that a flat sanding pad cannot follow. Plug it into a normal socket and start. What it does No compressor: mains powered, 230–240 V~ / 50 Hz, 350 W, with a 2 m cable. No air line, no three-phase supply, no rig to set up. Wood, metal, stone and brick: paint, varnish, rust, weathered coatings and surface contamination. Adjustable abrasive flow and speed: match the setting to the substrate and the coating instead of forcing one setting on every job. Built-in laser guide: keeps the blasting area visible while you work. 2.83 kg: balanced for steady, controlled use, with a side handle and hand-protection shield supporting the second hand. Consumable wear parts: the ceramic parts are designed to be inspected and replaced. Spare parts are available through support. In the box BLSTR Sander V2.0, side handle, hand-protection shield, ten laser-pointer caps and the manual — plus a carry bag, free on website orders. Abrasive grit is a consumable and is ordered separately. Grit: recommended size is 0.2–0.5 mm, roughly 30 to 80 mesh. On hardened paint and stubborn coatings, the right abrasive matters more than turning the speed up — the grit guide covers each option. Shipping Orders usually ship within 24 hours from the warehouse in Belgium, with free shipping to many EU countries. Shipping options and any duties are shown at checkout.
