Description Replacement Long Range USB antenna. Guidance If you ever have trouble connecting to your sensors or experience sensor lag (sensors plotting asynchronously across the screen) as the horse gets farther away, the following is a quick checklist to run through for possible reasons. Check that your sensors are sufficiently charged and turned on. If you have more than one set of sensors in your system, ensure you are attempting to connect to the correct set. If any sensor is a new replacement, the sensor must be programmed into the system (contact Equinosis Support for assistance). Check that the receiver is plugged in. It is recommended that the Parani UD100 receiver be used for the best results. Check that the receiver's blue light turns on when inserted into the tablet. Check the driver settings. The driver settings on tablets sometimes get reset following a Windows update. This is also a good thing to check if you receive a receiver replacement and are using it for the first time. On older tablets, it is also possible for the internal to be enabled, which will compete with the external receiver (see video link below). The internal wireless antenna should always be turned off, or connection or range issues can be expected. Watch this short video (https://vimeo.com/280255805) that explains how to check the driver settings and update to the correct receiver. For more in depth information, refer to the troubleshooting guide or contact Equinosis Support for assistance. DOWNLOAD PDF
