Exclusively for vehicles with the gas pedals pictured below. This nifty device clips on to your gas pedal allowing you to fully depress it without triggering a transmission downshift. Extremely handy for racing situations where you need to control gear shifts manually. When drag racing launching in 2nd gear and avoiding the kick down in to 1st will dramatically improve your 60' time on street tires. For automatic and DCT vehicles only. Does not work on manual transmissions. *UroTuning has this part applied to many different vehicle models. While we do our best to be as accurate and correct as we can be, PLEASE refer to the reference photos below to see if your vehicle has these specific pedal models! THANK YOU!* To install the Type A downshift blocker you must keep it straight when pushing it on around the post. The pyramid shape must stay upright and the base aligned parallel with the bottom of the pedal. It will take some force but it will click around it if you keep the blocker flat when installing. To install the Type B downshift blocker Place the flat part of the blocker facing downward around the factory stop behind the pedal. The rounded part should be facing up. Make sure it is straight when clicking it down. You may or may not hear a "click" sound when the blocker is secured. You can press on the pedal lightly with your foot to click the blocker into place. You will know it is in position because it will lay flat like in the above photo. Remember, rounded side facing up. Flat part down. To install the Type C downshift blocker Please see click here. To install the Type D downshift blocker Please see click here. Please double check your gas pedal type BEFORE ordering! Type C and D look similar. Based in Simi Valley, California, Burger Motorsports is a manufacturer of high quality performance parts including the famous JB4 tuner, a wide range of air intakes, oil catch cans, and beautiful custom exhaust tips.
