Custom console panel mount designed to properly fit your boat brand/model and electronics units. Designed to provide the ultimate mounting security for today's marine electronics. Constructed of high-grade aluminum with a powder coated finish and all stainless steel hardware. Designed with our state of the art 3D CAD software and manufactured on site at Boatlogix. Constructed with a base flange that bolts to the boat to provide a secure connection. The panel plate bolts to the base flange and the adjustable support assembly connects to the panel plate. The completed assembly is secured to the boat with stainless steel bolts, washers, and Nylon locking nuts. No screws to loosen or strip out. The dual mount top support bar is supported and connected to the panel plate with an adjustable support assembly. The gimbal brackets (not included) are installed to set the angle of the two screens in relation to each other. Units can be set in the first hole location and the viewing screens will be parallel, no angle inward. Units can be set in the second hole location and the viewing screens will be set at a 10 degree angle inward. Units can be set in the third hole location and the viewing screens will be set at a 20 degree angle inward. The wire way provides a large opening to allow for multiple cables to easily pass through the panel plate to the units. The wire way is covered by a rubber and aluminum cover with a powder coat finish. Sealing gaskets are provided for installation between the boat console and the base flange and between the base flange and the panel plate to seal these areas. Panel plate edges beveled after painting for an added touch. Patent Pending
