Introduction: This Pentype VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification. The Visual Fault Locator launches 650nm visible laser light into the fiber. When the light encounters a break or sharp bend, it scatters, and the scattered light can be observed emerging from the cable. The Visual Fault Locator can locates breaks in short patchcords, which an OTDR cannot detect due to their operating dead zone. A fault locator is also much cheaper than an OTDR. However, they are not recommended for using with darkcolored or armored cables. The Pentype Visual Fault Locator can be operated in either continuous wave mode (CW mode) or in pulsed mode. Pulsed mode aids in locating faults under high ambient light conditions and improve battery life. It also could be used in checking connectorquality. Often a connector may appears to be perfect. But inside the connector ferrule itself, poor gluing or dirty may create a microbend in the fiber. This microbend will produce excess insertion losses or return losses, and may result in premature failure of the connector. As the visual light launches through the fiber, it emerges from the connector in questionone can readily seethe distortion as a series of rings superimposed on a normal output. Bending or twisting the fiber may affect the overall intensity pattern, but not the ringpatternitself. Application: Maintenance in telecom, CATV Test Lab of optical fibers Fiber routing and continuity checking in optical networks Other fiber optic measurements Features: 2.5mm universal connector Operates either in CW or Pulsed mode with constant Output power Low battery warning Long battery life (up to 60 hours) Drop-resistant and dust-proof design of laser head Laser case ground design prevents ESD damage Portable and rugged Easy to use Can be used for ST / SC / FC connectors ,universal optical interface, single/multi-mode fiber for High stability, long-life work 650nm visible Note: battery is not included Specification: Model VFL650-5 Centralwavelength 650nmñ10nm(635nmisavailableonrequest) Emittertype FP-LD Outputpower 5mw 10mw 20mw 30mw LaserRange 5km 10km 20km 30km Opticalconnector 2.5mmuniversalconnector Operatingmodel BothCWandPulseavailable Pulsefrequency 2Hzto3Hz/9Hz Powersupply 2AAalkalinebatteries Battery LR6AAalkalinebattery Operatingtemperature -20øCto60øC Storagetemperature -40øCto85øC Dimension 13x167mm Weight 50g(withoutbattery) Product Sheet: Spec Sheet
Related
Related
Related
Related