This is our new Black Ops frame designed to be flown anywhere and take an absolute beating. Its the freestyle frame of choice for both Webb and Juz. Its also the frame newbies can get started with. Key features are: Extensive integrated bumper protection system, top and bottom, front and rear. Stealth Edition - Lower 25mm profile for strength and better CoG Innovative structural system and component layout High quality components inlcuding 7075 aluminium standoffs Integrated LED system Integrated XT60 Connector Low Profile PDB Integarted 1000uF capacitor Stainless steel inset arm mount system Package Contents Top Plate - 2.0mm Upper Bottom Plate - 1.5mm Lower Bottom Plate - 2.0mm Top Front Bumper - 2.0mm Top Rear Bumper - 2.0mm Bottom Front Bumper - 4.0mm Bottom Rear Bumper - 4.0mm Custom BOLT PDB Die cut neoprene foam rubber battery pad for the top plate 5in Arms - 4mm thick and tapers to 16mm at narrowest point Rear Vertical PDB 1000uF 35v Capacitor BOLT 300x25mm Battery Stap Hardware Kit including M3x25 7075 Orange Alu Standoffs - 3pcs M3x25 Rear slotted 6061 standoff - 2pcs Pad Kit Small black zip tie (same as other kit) 1.8x100mm - 10pcs Large black zip tie (same as other kit) 35x350mm - 4pcs 3M double sided tape - 1.2mmx20mmx100mm - 1pc The frame does not include motor mount screws or washers. Only ships with RED rear LEDs. Build Comments As these vertical CF plates are integral to the design, we have kept the tolerances as tight as we can. Accordingly, some sanding of the tabs for the vertical plates may be required to fit into the slots. Please avoid oversanding for a sloppy fit. Always include the vertical plates and bumpers in your build, they are a key structural design feature. The battery strap MUST go around the entire frame body and not just the top plate. This is a key design feature which clampts the two plates togther with the vertical plates. We recommend the longer BOLT battery straps (30cms) for this reason. Recommended Components All electronics, wiring, motors and props are not included and can be purchased separately. Please note that the Stealth version is specifically designed to take a Runcam Micro, Sparrow or Split or the Foxeer Micro Arrow.
Related
Related
Related
Related