NOTE: Conventional tuning modules offer only limited functionality compared to today’s e-bike standards. They often rely on complicated display button sequences for activation, deactivation, and speed-limit adjustments — making them cumbersome to use. Moreover, these tunings are highly vulnerable to firmware updates, which can easily disable them. Feature ❌ Conventional Tuning Chips ✅ EPAspeed B.Tuning Setup & Activation Complicated button combinations, easy to forget Simple app control — activate or deactivate with a tap Speed Limit Adjustment Requires rotating the wheel or entering complex codes Instantly adjustable in the EPAspeed app Firmware Resistance Easily disabled after motor or display updates Fully resistant to OEM firmware updates Display Compatibility Often shows wrong speed or altered speed Preserves full speed and distance accuracy Installation Wired directly into display or motor — risk of detection Contactless design — no software interference Bluetooth Functionality Availablem on selected model but expensive Built-in Bluetooth — control settings, monitor stats, set limits User Experience Outdated, difficult to use, and not intuitive Modern, seamless, and designed for real e-MTB riders Safety & Reliability Risk of error codes, firmware lockout, or damage during updates Engineered for long-term reliability with non-invasive integration In contrast, the EPAspeed B.Tuning series represents the next generation of e-bike tuning — fully app-controlled, firmware-resistant, and designed for effortless operation. With Bluetooth connectivity, intuitive controls, and invisible tuning functionality, EPAspeed delivers precision, reliability, and freedom unmatched by conventional solutions. Key Features• Tuning Control – Instantly activate or deactivate tuning• Adjustable Speed Limits – Set your preferred maximum assistance speed• Invisible Tuning Mode – Undetectable operation for smooth and safe performance• Trip Recording – Automatically save and review detailed ride statistics• Comprehensive Ride Data – Monitor distance, duration, average & max speed, and elevation 👉 Click here to view the EPAspeed 1.0 B.Tuning for Bosch Compatible with the latest 2021 Bosch Update (85Nm of torque) BOSCH ENGINES: 2019, 2020, and 2021 (Gen3 and Gen4) NO COMPATIBLE with GEN2 BOSCH ENGINE MODELS: ACTIVE LINE, ACTIVE LINE PLUS, PERFORMANCE LINE, PERFORMANCE LINE CX COMPATIBLE WITH LATEST VERSION 1.1.5.0COMPATIBLE WITH NYON2 POWER and TORQUE MAPPING settings via BT App The Advanced Tuning E+Plus BOSCH offers all the same features offered on standard Bosch tunings with the addition of an Bluetooth app that allow you to customize the power characteristics of the drive motor, based on the type of riding you do. You can customize both the speed and the power delivery according to your requirements. E+plus has designed a pre-set of maps from which you can choose through the app for: Eco, Urban, Touring, Enduro, Trial, and Race modes. Device designed for Bosch 2019, 2020, and 2021 engines in order to remove the speed limitation and fully exploiting the performance of these powerful engine for speeds up to 75Km/h. Installation is plug and play and takes place in a few minutes without opening the engine. ANTI DETECTION FEATURES The E+Plus Advanced Tuning BOSCH completes a special compensation procedure at the end of each ride that allows the tuning to remain undetectable by the Bosch anti-tuning algorithm. By allowing the countdown to complete at the end of each ride the 504 error can be avoided. The compensation begins after the bike is idle for approximately 60 seconds so once you have the tuning installed it is advised to wait and let the bike turn itself off after sitting idle. SPEED UNLOCKActivates/deactivates the speed limiter at 25 km / h (15mph). To be used on a closed circuit only.The user is required to pay € 0.99 with an in-app purchase to accept the liability assumption clauses. FULL SPEEDAllows you to configure the maximum custom speed, choosing from a range of preset values. Functionality available with speed unlock on. THEFT PROTECTIONAnti-theft system: the engine can be locked/unlocked.By pressing the “LOCK” button the motor does not work and, in the event of theft, the bike does not provide assistance. COMPLETE TUNINGThese cursors allow you to change the motor assistance correction factor based on speed. The Reseller can also modify the speed ranges to which the cursors refer. MAPPING CUSTOMIZATIONThe MYMAP buttons allow complete customization of the mapping, automatically memorizing the last configuration of the cursors. The original mapping sets the default values of the motor. OTHER FUNCTIONS – SPEED RELEASE FOR BOSCH E-BIKES - All data on the displays (Kiox, Purion, Intuvia, Nyon2) are displayed correctly even when Eplus is activated -Automatic wheel circumference calibration - Possibility to set the unlock status when turning on through the Eplus Tuning app - Possibility to set two different alternative methods to activate the unlock mode (walk, lights) - Without having to disassemble the chip, it is possible to recognize on the app which software version is installed. Very useful in case of remote assistance. - The functions described are available to resellers and can also be changed by end users - The Speed Unlocker version is not compatible with Cobi
Related
Related
Related
Related