Bosworth Pressure Pot Hydraulic Water Press Our Pressure Pot Hydraulic Water Press is used in creating high quality relines, repairs, splints, temporaries, and orthodontic appliances. The Pressure Pot Hydraulic Water Press guarantees a dense, super-smooth, color stable on any self-curing acrylic with just 10-15 p.s.i. Creating a temporary with the Pressure Pot Hydraulic Water Press increases strength by reducing voids and porosity. Our Pressure Pot Hydraulic Water Press does not require electricity, heat, or air pressure. It is lightweight and easily transportable. Saves time on many procedures! Total Weight of unit: 4lbs. 14oz. Inner Diameter: 3.75in. Outer Diameter: 4.5in. Inner Height: 3in. Overall Height: 7in. If Pressure Pot will not hold pressure, try the following: – Check “O” ring on bottom of the release button found on the underside of the pot top to make sure it is seated firmly.– Check “O” ring gasket on inside rim to make sure it is seated firmly. Lubricate with Vaseline. To prevent damage to Pressure Pot, do not exceed 15 p.s.i. of pressure. If the pressure gauge is not functioning properly, do not twist handle with force or attempt to use pot until a functioning replacement gauge has been installed. Periodically lubricate “O” ring inside pot with Bosworth Masque or Vaseline to extend life. To clean pot chamber, use an appropriate surface disinfectant.
