Brake adjustment like you’ve never seen before! Our patent-pending Cascade Brake Adjuster lets you increase the base pressure in your brakes, effectively crushing any air bubbles that may form in your brake line. This innovative design extends your bleed intervals, ensuring your brakes feel better for longer. You can add about 15 psi to the brake line without significantly affecting lever throw, maintaining smooth performance. Want snappier levers? Dial in a little extra pressure and find your perfect sweet spot in no time! The adjuster easily bolts onto your lever in place of the cover and diaphragm, and it’s still simple to bleed. Upgrade your braking experience today! The system functions by adjusting preload on a spring pushing a piston. This piston takes the place of the diaphragm. The spring force is responsible for the added pressure in the brake line. Elasticity in the spring allows fluid to enter the reservoir when the brakes heat up and it expands and leave the reservoir when the pads wear without a significant impact on lever feel. So as your brakes heat up over a lap or the pads wear down with use your brakes still retain that solid feel. This is what sets this apart from other brake dials you may have seen that simply force more fluid into the brake caliper. Those do not accommodate pad wear or increase in brake temp as our brake adjuster does. The bleed procedure is surprisingly like what it was before. A handful of cycles pressure and vacuum cycles coupled with moving the lever body around a little is all it takes to get all the air out of the adjuster. We advise doing this with the adjuster wound all the way in to minimize the amount of air starting in the adjuster. Then back the adjuster off and pressurize the syringe to push the piston up in the adjuster housing.
