Description Beneficial microorganisms on a wheat bran carrier. Enviro-Reps' specially tested and formulated Superbugs products exceed by many times the low-yield formulas sold by our competitors. Areas of application Ornamental ponds, water gardens, fish tanks, race ways, holding tanks, and closed aquatic systems with less than 10 - 15% water exchange per day. Purpose of using product Boost effectiveness of biofilter Degrade decaying organic matter, including excess fish food, leaves, fecal matter, sludge. Avoid use of chemicals Improve water clarity Reduce foul smells Improve water quality Increase beneficial microbial population Benefits Results in clean healthy water Important step in water quality management Reduced organics Reduced back flushing of filters Dosage rates Seeding dosage: This is the first dosage and will provide a significant boost to the system. Double the maintenance dose determined below. Many water systems will not need treatment during the cold winter months. Anticipate doing a seeding dosage once a year in early spring. Maintenance dosage: 1 oz. per 1000 gallons per week during months when the water temperature is above 50o F (10o C). Microorganisms are not significantly active when temperatures are under 50o F. 1 oz. per 1000 gallons per week is the average dosage rate for most ornamental systems. Increase dosage by 25% for systems that are in poor shape. Larger systems should use 3 oz. per 20,000 gallons. Application instructions Reconstitution procedure (optional, but recommended for optimal function of the microorganisms): Mix amount of BRF-2 determined above in a bucket containing a few gallons of pond water. Place in the sun for 4 to 6 hours. If possible, place a small airstone (diffuser) in the bucket to aerate and circulate the mixture during the entire reconstitution time. After the 4 to 6 hours, pour near water falls, pump outlets, filtration, and fountains where water movement will circulate product throughout system. If system is equipped with a filter, pour half the dosage into the filter, half into the pond. Ponds with none of the above should pour the BRF-2 evenly around the edges. Handling and storage Storage temperature of 40o F to 75o F is optimal. Keep containers sealed in a cool, dark area. Avoid exposure of dry material to moisture. High heat (above 90o F) should also be avoided, especially long-term exposure. Shelf life is 24 months under optimal storage temperatures.
