Brick: Santa Fe architecture and rusty old gates Silk finish range is 100% washable, no sealer needed and easy to use. How to Use Self sealing, low sheen finish. Always do a test patch to see if this product is right for your project. Easy to clean and stain-resistant finish. Minimal prep is required on your projects. Brush, roller or spray. Lightly scuff surfaces to promote adhesion. For best results use a synthetic smooth flat brush in nice even smooth strokes. Sealing, waxing or top coating are not required. In some cases, you may find some substrates may have tannin bleed-through. Should this happen, use Pureco base & blocker to prevent further staining. 600ml will cover approx 7-8 square metres in normal conditions. This will depend on the colour choice, whites will require more coats hence cover less square metres. Cure time 7 - 14 days. Modern sleek matte to low sheen finish. Note: Do not apply paint if the air temperature or substrate temperature is below 10 °C or above 35 °C. The temperature should not fall below 10 °C during the drying process as it will effect the adhesion of the Silk Finish and lengthen the curing process. *Please note: Silk Finish range should be used in conjunction with Base & Blocker as they are produced to work together.
