SP3 Surround Processor / Preamplifier The Bryston SP3 is designed to be a superb surround sound processor which delivers outstanding home theatre performance by integrating the latest digital innovations with high precision, low noise, fully discrete analog audio amplifier stages. With the inclusion of HDMI inputs, this brings the SP3 to the next step in the evolution of high performance audio quality and interoperability. Analog Inputs: 2x XLR Balanced Pairs, 4x RCA Single Ended Pairs, RCA Single Ended (7.1 Surround), 4x RCA Single Ended Pairs (Tape Loop, Digital Video Recorder) Digital Inputs: 8x HDMI, 2x AES/EBU (XLR), 3x Optical (TOSLINK), 4x SPDIF (RCA), USB 2.0 Analog Outputs: XLR Balanced (7.1 Surround), RCA Single Ended (7.1 Surround, Zone 2), ¼” Headphone Jack Digital Outputs: 2x HDMI, Optical (TOSLINK) Control Inputs: RS-232 (DB9), Ethernet (RJ-45), AUX IR Features: •7.1, 6.1 and 5.1 surround sound •Dolby True HD, Digital Plus, Digital EX, Pro Logic IIx •DTS-HD master audio, Dolby volume •Class A discrete audio circuits •4K compliant (with new HDMI board) •Separate digital and analog power supplies •Second zone output via single ended pair which allows for separate audio from another source •RS-232 serial data port for remote control via Crestron, AMX or similar control systems •Remote control included Options: •Available with silver or black faceplate •17” or 19” faceplate available (non-rack mountable) •Rack mountable option available (3U) •Factory USB Module upgrade (information regarding upgrade process and availability) Technical Specifications:- SP–3 INPUTS: 8 – HDMI 4 – SPDIF COAX 3 – Optical 2 – AES//EBU Digital 6 – Pairs Analog Single Ended 2 – Pairs Balanced XLR 7.1 Analog Passthrough 1 – USB SP–3 OUTPUTS: 7.1 Balanced 7.1 Single Ended 1 – Optical Aux – (stereo left/right downmix or extra Sub and Center) Audio Record Outputs: - 2 stereo (RCA) pairs from any analog input Frequency Response: 20Hz to 20kHz +/- 0.25 dB THD & Noise (20Hz to 20kHz at 2V output level): Less than 0.006% in all modes; below 0.0013% in Bypass mode. Signal to Noise Ratio : Not less than 100dB in all modes; 110dB in Analog Bypass Mode (Ref. 1V input, maximum gain, 22kHz bandwidth). Input Level: Maximum 2 Vrms in DSP modes, 4Vrms in Bypass Mode Output Level: 8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode Output Impedance:110 Ohms D/A, A/D Conversion:Crystal Semi-conductor 24-Bit Delta-Sigma DSP Engine: T.I. Bass Management: 2nd Order high-pass filter, 4th Order low-pass filter; Crossover Frequencies from 40 to 200 Hz Display : Four-line, 23-alphanumeric characters per line, Green or Blue on Black Trigger Outputs: One 12V on/off trigger; three 12V programmable Power Requirements: 100VAC, 115VAC, and 230VAC models Remote Functions:Power, master volume, source switching, mode switching, mute, and trims (in test mode) Control Port: RS-232 (bidirectional, DB9 connector) port for integration of external control systems (AMX, Crestron, and others using character-based protocols) Ethernet, TCP/IP Aux. Infrared Receiver Input: Mini-phone jack XLR Configuration : Pin 1 ground, pin 2 positive, pin 3 negative Front Panel: C–Series Silver or Black; 17” or 19” shelf mount Custom version 19” rackmount available Weight: Approx. 24 lbs (11 kg) boxed – 18 lbs unboxed Dimensions Inches:(including rubber feet):Shelfmount 17” or 19” wide faceplate x 15.5” deep x 6.25 high”
Related
Related
Related
Related