BST8-A6V0 is an eight-channel battery and supercapacitor analyzer to analyze all kinds of batteries and supercapacitors from 0.5 mA to 6 A, up to 5V, and discharging supercapacitor to 0 volts with gold-plated pins for the best connection. Each channel of the analyzer has an independent constant-current and constant-voltage source, which can be programmed and controlled by computer software. This system provides most applications in battery testing fields such as electrode materials research, battery and super-capacitor performance test, small-scale battery formation.. Brand new laptop with MS Window 10 latest version testing software is installed and calibrated for immediate use (Up to 20 sets of analyzers can be simultaneously controlled by one PC). SPECIFICATIONS: Electricity requirement 110V AC or 220V AC selectable for universal use Power Consumption 425W Battery Testing Control Unit Each battery and supercapacitor analyzer is required to connect to one battery testing control unit. One battery testing control unit could connect up to 10 battery-and-supercapacitor analyzers Current Three ranges of max. current are included and switchable on the device Range 1: 0.5 mA - 0.1 A with the cut-off current of 0.2 mA; Range 2: 0.1 A - 3 A with the cut-off current of 6 mA; Range 3: 3 A - 6A with the cut-off current of 12 mA. Accuracy: ±(0.05% of reading + 0.1% of range) Voltage Constant charging voltage range: 25 mV - 5V programmable The lowest discharging voltage: 0 V Accuracy: ±(0.05% of reading + 0.1% of range) Data register conditions Minimimum time interval: 100ms. Minimum voltage change interval: 10 mV Minimum Current change interval: Range 1: 0.2 mA; Range 2: 6 mA; Range 3: 12 mA Max. measurement cycles 65535 cycles Channels Eight independent programmable channels Each channel can set different working modes and functions independently Battery Holders Two types of battery holders are included in the BST8-A6V0 Standard package: 8 Gold Plated spring load holders with adjustable height for measuring cylinder or coin cell up to 70mm(H) (pls click a picture below 1-2 to enlarge) 8 alligator clips with cable for universal connecting (for pouch cell, click the picture 3-4 below ) Programs & Software The testing software is included to set various working modes for measuring the capacity and lifecycle of all types of rechargeable batteries Working modes Include constant current discharge, constant current charge, constant voltage charge, constant resistance discharge, rest, and etc. With a real-time monitoring interface and integrated graph/data windows, the testing process can be observed more directly and efficiently During the test, the software will provide instructions and warnings for assistance The calibration software can be used to calibrate the analyzer MS Excel 2013 30 days free trial is pre-installed for you to output the Excel data file.(Note: Updated information on 5/21/2015) Test Reports and Curves for analysis Different types of curves can be created by software base on user definition. (Voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc) Forms of data are created by the software. User can easily compare the performance of the batteries tested in channels both visually and statistically Protection and Auto-recover If the power failure occurs during testing, the system will shut down all operating channels. Once power is recovered, the system will automatically resume those stopped channels and ensure that the test is normally conducted, so that no cases will lose any data. Laptop Computer&WIFI Control Brand new laptop ( 4GB RAM 128GB SSD Hard drive) with MS Window 10 is included and the latest version testing software is installed and calibrated for immediate use. Notice: It is suggested to use an external hard drive to keep an instant backup of the collected data. Compliance CE Certified MET, TUV, CSA, UL certification are available upon request at extra cost Application Notes New buyers must buy the software installed laptop to avoid trouble from installation. If you like to run multiple battery analyzers on one Laptop, you can just buy multiple analyzers with one laptop which are offered at a discounted price. Warning: Please choose NEVER for Screen protection and Sleep in Power& Sleep setting of your computer, or it may lose connection from the battery analyzer. The customer can easily combine up to 20 battery analyzers (0.005-1mA, 0.1-10mA, 6mA-3000mA) by using a normal Ethernet cable connector via one computer. You may order MTI's movable rack to organize the battery analyzers (click the first picture below for more information) Standard Package: Item Description Qty 1 Battery analyzer 1 pc 2 Middle Machine 1 pc 3 Brand new laptop with MS Window 10 system and battery analyzer operation software installed 1 pc 4 Test-Control software pre-installed on the laptop 1 pc 5 Alligator Clips for connecting pouch cell battery 8 pcs
