Budget-friendly switch designed by QN Studio and manufactured by BSUN using their newest bottom housing and stem moulds. Although the specs make them look clacky and loud, don't forget this is still BSUN. Their mould design tends to make switches sound deeper; being the case here with K1 switches. Even with the fibreglass in the bottom housing, they don't sound very much clacky; best word to describe their sound profile is probably "thocky". Factory lubing-wise, QN Studio chose to go with as little lube as possible on the stem sliders and bottom housing rails. This was done in order to avoid any potential lube pooling problem while still retaining the smoothness. Switches sold in multiple of 10 and will be packed in a zipped bag or in a box. Specs: Linear PC top housing PA66 + 25% fibreglass bottom housing Modified POM stem 45g operating, 53g bottom out 2.0mm pre-travel, 3.6mm total travel 20mm single-stage spring Factory lubed 5-Pin plate mount Designed by QN Studio, manufactured by BSUN, using same mould as Udon and Jade Rosales.
