Introducing the newest high quality car wash soap on the market- BUBBA'S BUBBA'S High Foaming Car Wash Soap safely separates dirt and debris from all exterior surfaces without the risk of adding swirls to your painted surfaces thanks to its advanced formula that combines cleaning power with a spotless finish. Designed to work with bucket washes, foam blasters, and foam cannons making it an ideal choice for those who prefer a foam-based car wash. Safe to use on ceramic coating and carnauba waxes • Produces thick suds to clean at a higher level • Ph Neutral cleaner gently lifts away debris and dirt • Safe on cars with ceramic protection and carnauba sealants HOW TO USE: Foam Cannon Prepare Your Soap - Pour 1-2 Fl Oz of Bubba’s Car Wash Soap into the foam cannon add water and shake to mix the concentrate. Pre-Rinse and Let Sit - With your foam cannon ratio set to a runny foam begin to rinse the vehicle from top to bottom. Allow the Solution to dwell for up to 5 minutes in non direct sunlight. In direct sun light let dwell long enough to where the foam doesn’t dry- approximately 60 seconds. This will help loosen the dirt and contamination. Rinse & Apply Thick Foam - Rinse off and begin to spray a thick foam to the car after readjusting the foam ratio. Use a Wash Mitt - After spraying the thick foam wash the surface with a a clean wash mitt. Repeat until car is completely cleaned. Pro Tip: Have a wash bucket with soapy water and a grit guard ready, and as needed, to remove dirt and waste from the wash mitt. Rinse & Dry - Rinse the car and begin to dry the vehicle using a high quality microfiber towel. Avoid letting the soap or water to dry as this would create water spots. 2-Bucket Wash Prepare Your Buckets - in one bucket pour .5 Fl Oz of Bubba’s Car Wash Soap per gallon of water into the bucket with a Detail Guardz Dirt Lock and mix the concentrate using your sprayer or pressure washer. Fill the second bucket with clean water, this will be your rinse bucket. Pre-Rinse & Wash - Rinse your vehicle knocking off loose dirt and debris. Using a clean microfiber wash mitt apply the soapy water working from top to bottom. Pro Tip: Rinse the wash mitt often in the second rinse bucket to remove dirt and waste from the wash this helps prevent scratching. Rinse & Dry - Rinse the car and begin to dry the vehicle using an high quality microfiber towel. Avoid letting the soap or water to dry as this would create water spots. Safety Data Sheets SDS
