Bubble Magus Auto Roll Filter G2
Bubble Magus Auto Roll Filter G2 – Small, Medium & Large Take the hassle out of mechanical filtration with the Bubble Magus Auto Roll Filter G2, an automatic fleece roller filter d esigned to continuously remove waste and fine debris from your aquarium water. Available in Small, Medium and Large sizes, the Auto Roll Filter G2 makes it easy to choose the right capacity for your aquarium system. As water passes through the filter fleece, waste particles are captured before they can break down and contribute to nutrient build-up in your aquarium. As the fleece becomes dirty and water flow is restricted, the automatic system detects the change in water level and advances the roll, bringing fresh filter fleece into position. This provides continuous mechanical filtration while reducing the need for frequent manual filter sock cleaning and replacement. The Auto Roll Filter G2 is designed for internal sump installation and features an automatic motorised roll system, water-level monitoring and a long-lasting non-woven fleece roll. Whether you're running a compact aquarium or a larger marine or freshwater system, there's an Auto Roll Filter G2 size to suit your setup. Key Features Automatic fleece roller filter for aquarium mechanical filtration Continuously removes waste and fine particulate matter Automatically advances the filter roll as the fleece becomes dirty Helps reduce manual maintenance compared with traditional filter socks Automatic water-level monitoring activates the roll mechanism Powered by a 12V DC motor Includes automatic controller Built-in timeout function helps prevent unnecessary fleece use Long-lasting non-woven filter fleece Designed for internal sump installation Suitable for marine and freshwater aquariums Available in Small, Medium and Large Choose the size to suit aquariums up to approximately 300L, 500L or 1000L Choose Your Size Size Recommended Aquarium Volume Filter Roll Width Roll Length Inlet Diameter Footprint Height Small – ARF-S G2 Up to 300L 100mm 25m 32mm 115 × 130mm Approx. 390mm Medium – ARF-M G2 Up to 500L 150mm 25m 32mm 160 × 165mm Approx. 435mm Large – ARF-L G2 Up to 1000L 200mm 50m 40mm 220 × 180mm Approx. 435mm Aquarium capacity recommendations are guidelines. Actual suitability will depend on aquarium volume, flow rate, bioload and the amount of waste produced by your system. Dimensions refer to the filter body/footprint and may vary depending on whether the motor and inlet assembly are included in measurements. How the Auto Roll Filter Works The Bubble Magus Auto Roll Filter G2 provides automatic mechanical filtration by passing aquarium water through a fine fleece filter roll. As water flows through the fleece, suspended waste and particulate matter are trapped within the filter material. This helps remove debris from the water before it has the opportunity to break down and contribute to nutrient accumulation. As the fleece gradually becomes loaded with waste, water flow through the filter material is reduced and the water level changes. The built-in water-level monitoring system detects this change and activates the motor, automatically advancing the roll to expose a fresh section of clean fleece. The process then repeats automatically, providing continuous mechanical filtration with minimal hands-on maintenance. Reduce Filter Sock Maintenance Traditional filter socks can require frequent removal, washing and replacement. The Bubble Magus Auto Roll Filter G2 provides a convenient alternative by automatically advancing the fleece as it becomes dirty. This can help reduce the repetitive maintenance associated with reusable filter socks while maintaining effective mechanical filtration. The result is a cleaner and more convenient filtration routine, allowing you to spend less time cleaning filter socks and more time enjoying your aquarium. Automatic Roll Control The Auto Roll Filter G2 uses a 12V DC motor and automatic controller to operate the filter roll. The water-level monitoring system detects when the fleece becomes sufficiently blocked with waste and activates the roll mechanism to bring fresh fleece into position. The controller also features a built-in timeout function designed to help prevent excessive fleece consumption if unusual water-level conditions occur within the sump. Long-Lasting Filter Fleece Each Auto Roll Filter G2 size uses a non-woven filter fleece designed to capture particulate waste from aquarium water. The supplied roll length varies depending on the selected model: Small: 25m roll Medium: 25m roll Large: 50m roll The actual lifespan of a roll will vary depending on aquarium size, bioload, feeding habits, water flow and the amount of particulate waste produced by the system. Replacement fleece rolls are available when the supplied roll has been used. Which Size Should I Choose? Small – ARF-S G2 The Small model is designed for compact aquarium systems up to approximately 300 litres. Its compact footprint makes it a suitable option where sump space is limited. Medium – ARF-M G2 The Medium model is designed for aquarium systems up to approximately 500 litres and uses a wider 150mm filter roll for increased mechanical filtration capacity. Large – ARF-L G2 The Large model is designed for larger aquarium systems up to approximately 1000 litres. It features the widest 200mm filter roll and a longer 50m fleece roll, making it the best choice for larger systems and aquariums with higher mechanical filtration demands. Installation The Bubble Magus Auto Roll Filter G2 is designed for internal sump installation. Before installation, ensure your sump has sufficient space for the selected model and that the filter can be positioned correctly for your aquarium's plumbing and water flow. Connect the filter to your aquarium's drain or overflow system according to the manufacturer's instructions. Ensure the filter is securely positioned and that the inlet plumbing is correctly connected before starting the system. The filter should be installed according to the manufacturer's recommended setup and operating instructions. Maintenance Although the Auto Roll Filter G2 significantly reduces the need for manual filter sock cleaning, regular inspection and maintenance are still recommended. Check the filter regularly to ensure the fleece is advancing correctly and that water is flowing through the system as expected. Inspect the water-level sensor and keep it free from debris or obstructions. Check the motor and roll mechanism periodically to ensure they remain free from accumulated waste or salt creep. Replace the fleece roll when it has been fully consumed. Regular maintenance of the filter and its components will help ensure reliable long-term operation. Important Information The Bubble Magus Auto Roll Filter G2 is designed for use as a mechanical pre-filter within an aquarium filtration system. It is not a complete aquarium filtration system by itself and should be used alongside appropriate biological and chemical filtration where required. Always select a model appropriate for your aquarium volume, flow rate, bioload and available sump space. The recommended aquarium capacities are general guidelines and actual fleece consumption will vary depending on the individual aquarium system. Ensure the filter is installed correctly and that all plumbing connections are secure before operation.
More you might like
Related
Bubble Magus Auto Roller Filter
Related
Bubble Magus Auto Filter Roll
Related
Bubble Magus Auto Filter Roll
Related