FULL SHEET DESIGN(Simulated material) Great for easy engraving, fast paint fills, easy cleanupand cuts easily while staying flat and consistent. Be sure to select the base material for the design.MOST POPULAR IS MDF - Cuts with Diode or Co2 Material available: CLEAR Cast Acrylic - (Cuts with CO2 Laser Only)Measuring 12" x 19" x 1/8", CLEAR Cast Acrylic allows the image to show on BOTH sides, one being shiny and the other side slightly textured, light glows through the design, This provides a nice clear edge when cut. WHITE Cast Acrylic - (Cuts with C02 Laser Only)With Image on one side or select 2 Sided, (Light does not shine through). It provides a pure white edge when cut or engraved. BLACK Cast Acrylic - (Cuts with Diode and Co2 Lasers) Image on 1 side or select 2 Sided. (Light will not shine through). Provides a pure black edge when cut or engraved. Designs on Thin Decorative Film (.01 mm) Available in White or Clear - DIODE LASER FRIENDLY(Cuts with Diode and C02 Lasers, and Vinyl Cutters) This bendable material cuts very fast and is great for earrings, suncatchers, lamps, book marks or anything you need a strong lightweight colorful material. Measuring 12" x 19". Clear Film has design on both sides and is slightly transparent, this side with the image will be flat and not shiny, the other side will be high gloss and show the image through.White Film is not transparent and has an image on one side or can also have an image on both sides if ordered that way, the surface with the image will not be shiny and will appear flat but colorful, the side without an image will be glossy white. Creative Film with Adhesive Back, has an strong adhesive already applied to the back of the sheet, this is intended to be used where the film is adhered to a backing sheet and has the one side with the image only, however the Clear Film does show images on both sides, however it has the adhesive on the other. Designs on 1/8" (3mm) MDF MDF wood - (Cuts with Diode or CO2 Laser) A great option for an easy to cut material and offered in one sided or two sided. Sheet size is 12" X 19" and is 3mm thick, this provides a wood cut. .
