The Bully Glyder is a rack attached trolley designed to replace a traditional top-loaded weight pin cable system. Featuring a robust build and proprietary machined UHMW rollers, the Bully Glyder easily installs and glides along any 2x2, 2x3, or 3x3 upright, ensuring that your plates are free from sway. Every Bully Glyder features four hourglass shaped UHMW rollers. Each roller contains two bearings which allow for smooth travel up and down your rack. The Glyder is constructed of 1/4" thick CNC cut steel side plates. Each plate features our signature Bully head logo and two adjustment screws ensuring a precise fit on both imperial or metric racks! 21.75" long removable loadable weight horn (8" of plate loading space on each side once installed). A shorter space-saving weight horn is also available. Horn is 1.9" in diameter and features snap-ring endcaps. Black plastic magnetic sleeve spacers Cable attachment is 2.75" from the rack Tested to 500lbs+ Durable black textured powder coat finish Optional 10" Extension brackets available to kick the attachment point out further from the rack upright 5/64, 1/4, and a 5/16 hex key wrench required for installation *The Bully Glyder is not designed to be dropped to it's pinned (start) position, doing so can result in damage to rollers and other hardware.*The Bully Glyder is designed with the understanding that your rack is firmly mounted in place, i.e. bolted to the ground or wall. Rack has the propensity to tip based on amount of weight and angle of pull. Purchase of the Bully Glyder assumes you have read and understand all risks associated with it's use.
