This Tetsu Bunka feature a short size blade, good distal taper, and K-tip. Flat profile with a slight curve toward the tip. The San-mai is made from 26C3 steel core with soft iron cladding. Forged to shape and to geometry the blade is ground on water cooled grinding wheel with a satin finish. Specs : - Blade length : 185mm- Blade height at heel : 48mm- Hagane : 26C3- Jigane : Soft iron- Handle : Wa (Octogonal), with Bog Oak- Balance point : near the heel- Weight : 156gr- Finish : Black Kurouchi with satin bevels - Hardness : ≥ 65HRC Allow me a couple of days to sharpen and send the knife to you. If any question or requirement, just message me at [email protected]. My blades are made from carbon steel not stainless steel, it gives my knives an unbeatable sharpness. I prefer carbon steel for it ease to sharpen, the fine edge it takes and the beautiful patina that will develop. You do, however, need to give carbon steel knives just a little extra care to keep them in top shape. There are trade-offs in everything. Claddings stated as "dirty wrought iron" will be very reactive. My handles are made from local, untreated, un-stabilised wood. I use linseed oil and bees wax to protect them. The color, may change with use. When stated, my knives bevels are ground and polished with Japanese whetstones. This allow an easy maintenance at home. For Sharpening service please contact Scott from www.sheffieldknifesharpening.com EU postage with Colissimo International postage with DHL express
