[shortdesc] Managed, Rack-mountable, 48 x 10/100 Fast Ethernet PoE+ ports, 4 x 1G SFP Uplinks, PoE+ (370W), Layer 2 [/shortdesc] [properties] Properties C1000FE-48P-4G-L Description 48x 10/100 Ethernet PoE+ ports, 370W PoE budget, 2x 1G SFP/RJ-45 combo uplinks and 2x 1G SFP uplinks Product Family Catalyst 1000 Product Type Ethernet Switch Number of Ports 48 Uplink Interfaces 2 SFP/RJ-45 combo and 2 SFP Available PoE power 370W Fanless No Width 17.48" Depth 13.78" Height 1.73" [/properties] [specifications] Specifications C1000FE-48P-4G-L Console Ports 1x RJ-45 console1x USB-A (storage/Bluetooth console) CPU ARM v7 800 MHz DRAM 512 MB Flash Memory 256 MB Forwarding Bandwidth FE: 8.8 Gbps Switching Bandwidth FE: 17.6 Gbps Forwarding Rate (64-byte) FE: 13.09 Mpps MAC addresses 16000 Maximum Active VLANs 256 Operating TemperatureUp to 5,000 ft (1500 m) -5 to 45 °C Operating TemperatureUp to 10,000 ft (3000 m) -5 to 40 °C Safety UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, IEC 62368-1, UL 62368-1, GB 4943.1-2011 EMC: emissions 47CFR Part 15 Class A, AS/NZS CISPR32 Class A, CISPR32 Class A, EN55032 Class A, ICES-003 Class A, VCCI-CISPR32 Class A, EN61000-3-2, EN61000-3-3, KN32 Class A, CNS13438 Class A EMC: immunity EN55024 (including EN 61000-4-5), EN300386, KN35 Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU Telco Common Language Equipment Identifier (CLEI) code U.S. Government certifications USGv6 and IPv6 Ready Logo Ethernet interfaces 10BASE-T: RJ-45, 2-pair Cat 3/4/5 UTP100BASE-TX: RJ-45, 2-pair Cat 5 UTP1000BASE-T: RJ-45, 4-pair Cat 5 UTP1000BASE-T SFP-based: RJ-45, 4-pair Cat 5 UTP Telnet - SSH Yes TACACS, TACACS+, RADIUS Yes [/specifications] [accesories] Part Number Description CAB-CONSOLE-RJ45 Console Cable 6 Feet with RJ-45 CAB-CONSOLE-USB Console Cable 6 Feet with USB Type A and mini-B Connectors PWR-CLP Power Cable Restraining Clip RCKMNT-1RU-2KX Rackmount kit for 1 RU for C1000, 2960-X and 2960-XR (19/23/24/etsi) [/accesories] Cisco C1000FE-48P-4G-L Switch The Cisco C1000FE-48P-4G-L is a managed Fast Ethernet switch built for SMB and branch deployments that need PoE+ at scale. With 48 Fast Ethernet PoE+ ports and four 1G SFP uplinks (two SFP/RJ-45 combo plus two SFP), it powers IP phones, cameras, and access points with a 370W PoE budget while delivering secure, reliable Layer 2 connectivity and simple management. Key Features: 48 x Fast Ethernet PoE+ Ports: 30W per port (PoE+), 370W total budget for powering IP endpoints. 4 x 1G Uplinks: Two SFP/RJ-45 combo and two SFP ports for flexible aggregation and expansion. Simple Management: On-box web UI and CLI, plus Bluetooth access via USB-A for quick setup. Security & Monitoring: 802.1X, BPDU Guard, SPAN, ACLs, and sFlow to protect and observe your network. Energy Efficient: IEEE 802.3az Energy Efficient Ethernet to reduce power during idle periods. Technical Overview: Recommended for: SMB, retail, and branch offices requiring PoE+ and dependable Fast Ethernet access. Ports: 48 x 10/100 Mbps PoE+ access, 4 x 1G SFP uplinks (2 SFP/RJ-45 combo + 2 SFP). Switching Capacity: 17.6 Gbps; Forwarding Bandwidth: 8.8 Gbps; Forwarding Rate: 13.09 Mpps. Hardware: ARM v7 800 MHz CPU, 512 MB DRAM, 256 MB flash. Operating Temperature: -5 to 45 °C up to 1500 m; -5 to 40 °C up to 3000 m. You can check the related tab for the C1000FE-48P-4G-L datasheet.
