Ai C80-10 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature. C80 or as we call it "The Beast". For cryo temp injections, this is the unit. With over 2000W at -40C, this unit has no problem maintaining -40C or lower temperatures during the recovery process. This can be paired with either the Minifecta or Trifecta extraction systems. On the Trifecta, this unit works well with the standard C30 paired to the Post Chiller, and the C80 paired directly to the jacketed pressure vessel. This allows the C30 to take the brunt of the temperature change by cooling the recovered solvent before it hits the pressure vessel. This allows the C80 to focus 100% of it's efforts maintaining the cryo temps in the pressure vessel. With this configuration constant -40C or lower temps are easily sustainable. Working temperature range -40°C to -75°C (unit is not designed to run at temperature hotter than -40°C) Electrical requirements 220V 60Hz 1-PH 22A, 4750 watts Compressor Make: KK Power: 208-230V 60Hz 1-Phase Number of compressor: two Refrigerant: R404A (2680g) and R23 (710g) Cooling capacity (assuming working environment is 25°C or 77°F) @ -40°C: 2000W @ -50°C: 1500W @ -60°C: 1000W @ -75°C: 280W @ -78°C: 180W Reservoir Capacity: 10 liters or 2.6 gallons Dimensions: 17.5 x 7 x 8.5 inches (LxWxH) Material: Type 304 stainless steel Chilling fluid connection: 1/2" NPT Drain port: 3/8" barb Recirculating pump Pump type: Centrifugal Model: 25PLBR30-10 Pumping speed: 8 gallon/min or 30L/min Power: 280W Pressure: 1 bar Temperature controller Digital microprocessor PID controlled Accuracy: +/- 2°C Display unit: Celsius °C Unit/shipping weight 515 lbs / 615 lbs UL Listing Available (+$1000) Download Product brochure
