[shortdesc]Cisco AIR-ACCPMK3700-2: A reliable accessory for enhanced network performance. [/shortdesc] [properties] Properties C9120AXI-E Description Cisco Catalyst 9120AX Access Point, internal antennas; Wi-Fi 6; 4x4:4 MIMO, E Domain Product Family Cisco Catalyst 9120AX Series Access Points Product Type Access Point Hardware Type Indoor Features - 802.11ax (Wi-Fi 6) - Cisco RF ASIC - Uplink/downlink OFDMA - MU-MIMO technology - Target wake time - BSS coloring - Intelligent Capture - Flexible Radio Assignment - Dual 5-GHz radio support - Smart antenna connector - Cisco Mobility Express - Multigigabit Ethernet support - Bluetooth 5.0 - Container support for applications Line Coding Format OFDMA MU‑MIMO technology Yes Frequency Band 2.4 GHz, 5 GHz Interfaces 1 x 1/2.5GBase-T - RJ-45 ¦ 1 x management - RJ-45 ¦ 1 x USB 2.0 Ports 1 x LAN Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, Bluetooth 5.0, 802.11ax 802.11n version 2.0 (and related) capabilities ● 4x4 MIMO with four spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support Input power requirements ● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) ● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Internet of Things (IoT) Compatible Yes Dimensions in. 8.5 x 8.5 1.7 in. [/properties][specifications] DRAM 2048 MB Flash 1024 MB Encryption Algorithm AES, TLS, PEAP, TTLS, WPA, WPA2, EAP-SIM, EAP-FAST Authentication Method MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM Regulatory Domain E regulatory domain: • 2.412 to 2.4835; 13 channels • 5.150 to 5.350 GHz; 8 channels • 5.470 to 5.725 GHz; 8 channels Software Included ● Cisco Unified Wireless Network Software Release 8.9.x or later● Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later Service & Support Operating Temperature 32 °F - 122 °F Available transmit power settings 2.4 GHz● 23 dBm (200mW)● 20 dBm (100mW)● 17 dBm (50mW)● 14 dBm (25mW)● 11 dBm (12.5 mW)● 8 dBm (6.25mW)● 5 dBm (3.13mW)● 2 dBm (1.56mW)● -1dBm (0.79mW)●-4dBm(0.39mW) 5 GHz● 26 dBm (400mW)● 23 dBm (200mW)● 20 dBm (100mW)● 17 dBm (50mW)● 14 dBm (25mW)● 11 dBm (12.5 mW)● 8 dBm (6.25mW)● 5 dBm (3.13mW)● 2 dBm (1.56mW)● -1dBm (0.79mW) [/specifications] Cisco Access Point C9120AXI-E The Cisco Catalyst 9120AX Series Access Points represent a significant leap in wireless network technology, offering more than just compliance with the Wi-Fi 6 (802.11ax) standard. They are an integral part of Cisco's intent-based network, scaling effectively to meet the growing needs of various network sizes. The C9120AXI-E is made for indoor environments with internal antennas for the E domain. Key Features: 2.4-GHz and 5-GHz bands 4x4:4 MIMO Cisco DNA The tabs contain the Cisco C9120AXI-E datasheet with all the specifics you need.
