FEATURE High-Temperature Stability to 1650°C Withstands water and steam after curing Safe to Use - Non-Flammable Excellent Thermal Shock Resistance Low Shrinkage, High Strength Available - Off the Shelf Single Part System Made in USA How to use Stir and mix thoroughly. Apply for bonding and protecting thermocouples, heat sensors, critical heating elements, laminating, and coating at elevated temperatures. Offer high bond strength, solvent, and electrical resistance. Bonding alumina, metals, ceramics, graphite, and glass. Air dry for 4 hours minimum. Post cure 2 hours at 150oF (65oC) followed by 4 hours at 392oF (200oC) for additional moisture resistance. It is excellent for repairing inside the chamber of MTI Box furnaces. Note This product is pre-mixed. No additional thinner and hardener is necessary Please don't use it as a refractory coating for the fibrous ceramic board, which may cause surface cracking Routine stir is necessary after opening the box Shelf life: 6 months at room temperature Physical Properties Max. Use Temp.: 3000°F (1650°C) Base Al2O3 Compressive Strength: 3,000 psi Flexural Strength: 1,100 psi Dielectric Strength: 200 volts/mil Specific Heat: 0.24 BTU / # oF Volume Resistance: 10^8 Thermal Conductivity: 15.0 BTU in/hr. oF ft.2 Thermal Expansion: 4.5 x 10-6/ F Color: White Consistency: Creamy Paint For mixture For Powder
