Cable Management Bracket and Clips

Packard 3D Designs LLC Verified independent store

→

Upgrade your cable management with this configurable cable mounting solution! Start by choosing the number of cable channels per bracket and the number of brackets needed for your setup. Simply install the cable brackets using the included removable adhesive strips. Once brackets have been installed, the cables can easily be organized and removed using the removable clips. The clip size accommodates a wide variety of diameter cables, up to 0.275" in diameter. Extra clips are included. Installation Instructions:1. Determine the mounting location for the bracket.2. Clean the mounting location surface with rubbing alcohol.3. Remove the liner from the adhesive strips on the back of the bracket.4. Press the bracket into place and hold firmly for 30 seconds.5. To remove, pull on the adhesive strip tabs. Pull parallel to the mounting surface (in the direction of the arrow on the adhesive strip tab). 6. Reinstall brackets by replacing the adhesive strips on the back. Additional adhesive strips are not included. Notes:- This item is made to order. Further design modifications are available upon request (e.g., changing the clip diameter, changing the base thickness, changing the channel spacing).- The cable clips are only designed to support the weight of the cable.- The cable clips do not "grip" onto the cable. The cable will be allowed to slide through the clip freely. - This item is created with FDM 3D printing and may have minor surface defects as a result. Show more