The productivity boosting Ramset™ CableMaster™ 800 Plus enables fast, durable and reliable direct fixing for plumbing, data and electrical installations. With a fixing rate 8x faster than the traditional drill and fix, and an additional 15% (or 500 shots) per battery charge, the CableMaster™800 Plus gives you the speed and productivity you need! Available to pair with the PulsaLift™ 800 Plus system, the CableMaster™800 Plus can be safely used in overhead applications with a variable length extension pole accessory, delivering fast, consistent and reliable performance while minimising exposure to concrete dust. Features:- 82J power – Consistent fixings even in extreme applications 20 pin magazine – Compact size for light weight and improved access Battery & Fuel Cell Gauge – Convenient LED display to help avoid running out of battery or fuel Great Line of Sight – Slimline nose design enables great sight lines Minimise Dust Exposure – Mitigate drilling and drastically reduce the risk of dangerous dust Lithium Battery – Fast charge, up to 3,500 shots between charges Tool-less Adjustment – Easily set depth of drive Stop & Go Technology – Power saving feature isolates battery when tool is not in use Accessories – Easily removable fastener guide and magazine, optional 50 pin magazine for increased productivity Greater tool clearance – Allows the tool to fit in close to edge applications Removable Support Leg – Ensures tool is at 90° to work surface for optimum fixings Electronically controlled fuel injection – Ensures consistent power in a wide temperature range Low Maintenance – Designed to work in all Australian conditions Standard Operating Procedure:- Always read and understand the instruction manual before attempting to operate a Ramset™ Gas Technology Tool. 1. First insert the fuel cell and battery into the tool.2. Insert the collated fasteners into the magazine.3. The clip should then be placed on the end of the fastener guide without compressing the front end of the tool.4. The tool should then be compressed against the work surface. (Making sure that the tool is perpendicular to the work surface).5. Once the tool is compressed the trigger can be actuated and the fastener is driven into the substrate securing the clip in place. Specification:- Weight According EPTA (Kg) 3.7 kg (with battery) Net Depth Dimension (mm) 309 mm Net Length Dimension 399 mm Net Width Dimension (mm) 113 mm Power (Impact Force) 82 J Magazine Capacity 20 fixings Actuation Force 4.5kg Fuel Cell Capacity 750 shots appx Battery Charge Capacity 3500 shots Operating Temperature Range -15°C to +49 °C Fixings Per Hour 1000 fixings Fixings Per Sec 2 fixings Fastener Length Range 15 – 40mm Vibration (EN ISO 8662-11) hav 4.1m/s2
