Note: lead time on 3d printed ferrules is currently 5-10 business days (4/2/26). $35 for a set of 5. Add a matching ferruled pitch tool to a 5-pack for $39. Black, yellow, 2 shades of green, and silver caps. 3d printed in ABS. 2" tall. ***NOT recommended for use with graphite iron shafts. Designed for .355" taper tipped steel shafts. They'll work with .370" tip shafts as well, but will need to be reamed out slightly before installation. If a ferrule is too snug to slide up a shaft to where it needs to sit, do not ram it up the shaft with brute force. Ream out the inner diameter until it fits. Installation instructions: These 3d printed ferrules install similarly to traditional ferrules with one key exception: we advise against using force to slide the ferrule up the shaft for any 3d printed design that has vertical seams between colors. 3d printed ferrules with intricate designs are a bit more delicate where 2 colors meet and form a vertical seam. Using force to push a ferrule that is too snug higher up a shaft can cause cracking or splitting at the seam. Instead, if a ferrule is too snug for your shaft, we recommend widening the inner diameter of the ferrule with a cylindrical file, a drill, or sandpaper until it can slide up to where it will sit above the hosel.
