Link CAN Lambda Kit Digital Wideband Sensor Module (CANLAM) The Link CAN Lambda Kit is a digital wideband sensor module engineered for integration with CAN bus systems. This kit includes a Bosch LSU 4.9 sensor and is designed for accurate measurement of oxygen levels in exhaust gases. The module supports direct digital communication via CAN protocol and is compatible with leading aftermarket ECUs. Key Features Digital wideband sensor control via CAN bus Bosch LSU 4.9 Lambda sensor included Compatible with leading aftermarket ECUs 1 x 4-pin male DTM connector for power and CAN 1 x 6-pin mating connector for LSU 4.9 Lambda sensor Enclosure dimensions: 60 x 26 x 15 mm Lead length: 170 mm Weight: 70 g Controller input voltage: 7.5 – 20 V Sensor input voltage: 10.8 – 16.5 V Controller input current: 100 mA Sensor heater input current: 8 A Operating temperature: -20°C to 100°C Sensing range: 0.67 – 10 lambda CAN frequency options: 1Mb/s, 500kb/s, 250kb/s, 125kb/s Never requires free air calibration What's Included CAN Lambda device Bosch LSU 4.9 sensor Deutsch 4-way connector kit O2 bung and plug 2 large stickers 2 small stickers Quick Start Guide Vehicle Fitment Not specified by manufacturer Installation Notes If using with a G4+/G4X PlugIn ECU, a Link CANPCB cable and a Link CANF field insertable CAN plug are required to access the CAN port on the PlugIn PCB. The LSU 4.9 sensor is intended for aftermarket use only; no warranty is provided on the sensor as per Bosch’s policy. Proper CAN protocol must be followed; refer to the manual for guidance. Download the CAN-Lambda QuickStart Guide and CAN-Lambda manual for detailed instructions.
