For maximum control and flexibility with regards your auxiliary lighting installations, Lazer is pleased to offer a Bluetooth push button. Compatible with the CANNY Interface, the FLIC2 Smart Button enables control of your lights without the need for connecting additional wires within your vehicle The FLIC2 Smart Button can be installed anywhere within the vehicle, or on your person, within 10m of the CANNY Interface it’s paired with. It allows for lighting functions to be controlled at the touch of a button, and via the CANNY.LZR app can be configured to control up to 4 outputs, as a stand-alone switch or in combination with other FLIC2 Smart Buttons. The Smart Button can also be programmed to operate lights regardless of the vehicle ignition being on (or more specifically regardless of power being received by the vehicle’s CAN bus system). Examples of practical functions include: De/activation of your high beam lights (regardless of the vehicle high beams being on/off) – especially relevant in countries which restrict the number of auxiliary lights permissible to be connected to the vehicle high beams. De/activation, or switching, of the position light function on your Lazer product. De/activation of your work / reverse lights on the vehicle. The customer can select via the CANNY App whether to configure the button so that the CANNY output stays on, or switches off, when the vehicle ignition is off (and when CAN signals stop being sent over the Can Bus system) Mode select on Beacon function of your lamps Note, when using the FLIC2 Smart Button to control the yellow dip mode of an Elite+ product, it would be required to wire in an additional relay to the switching channel of the lamp, to reverse the polarity of the signal. Please check out our blog piece for details on how to do this. The FLIC2 Smart Button isn’t only compatible with auxiliary lighting solutions. Via the CANNY Interface only, the Smart Button can be configured to operate the outputs of CANNY, regardless if those outputs have been set to control auxiliary lighting, or other 12V accessories fitted to the vehicle. For a Quick Start Guide to the FLIC2 Smart Button please check out the Downloads section. Note: The FLIC2 Smart Button is only compatible with a corresponding CANNY Interface. Canny Vehicle Compatibility List
