The Cantek MX330 Automatic Edgebander is a compact entry-level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX330 can output high-quality edges on cabinet parts and more. The machine is equipped with end trimming, flush trimming, and buffing units. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 2mm. Compact design makes it the ideal edgebanding solution for small workshops. Precise adjustments for optimum edge quality. Castor wheel adding mobility to your edge bander. Available in 230V, 1-Phase. Key Advantages PLC control system with LED display and keypad. Workpiece is fed by upper conveyor belt & idle table rollers. Edge coil support plate: Ø 800mm (31.5") for PVC/ABS. Automatic edge feeding with a thickness in HARD-PVC/ABS are cut with guillotine shears. 1.2 kg (2.6 lb) Teflon-coated hot-melt glue pot. Spring-loaded pressure unit with (2) chrome pressure rollers. Heavy-duty pressure beam with extendable workpiece support. Heated infeed fence for pre-heating the panel for optimum glue penetration. Mobility wheels allow you to move your edge bander in and out of position to save you work space. Mechanical digital readouts for convenient and quick adjustment to the working units & thickness. Working Units A. Heated Infeed Fence The infeed fence is heated which pre-heats the panel prior to the glue being applied. This results in deeper penetration of the glue inside the panel allowing for optimal conditions for the best bond. The temperature is adjustable to your specific requirements. B. Glue Spindle The steel serrated glue spindle ensures optimal glue coverage on the edge of the panel. The glue amount can be conveniently adjusted using an adjustment knob. C. Guillotine Shear The guillotine shear can trim coiled material up to 2mm in thickness. This can be turned off for individual strip feeding D. Pressure Rollers The pressure roller unit consists of one large chrome steel roller and a smaller chrome pressure roller. The pressure rollers ensure the edge is properly adhered to the panel edge the glue bond between the edge. The rollers are adjustable to the edge thickness by referencing from a sample of the edge. This ensures consistent pressure for optimum bonding results. E. End Trimming Unit The end trim saw unit is mounted on high-precision linear bearings, which ensure perfect cutting results. The high RPM dual saw blades meet any challenge, regardless of edge type & thickness. The blades trace the leading and tail edge of the panel to ensure the exact precision of end cuts. The sawblade turn at 8800 RPM. (2) Blades are 80mm in diameter. F. Flush and Radius Trimming Unit / Top and Bottom Trimming Unit The top and bottom trimmers are spring-loaded and use a tracing wheel to trace the panel's surface. The result is a consistent trimming of the edge according to the panel surface. The rollers also ensure no marking of the workpiece. The knives are capable of flush and radius scraping with 2mm radius knives as standard. They can be adjusted in and out using mechanical digital readouts for repeatable and accurate positioning. The insert knife cutters turn at 10500 RPM. G. Buffing Unit The buffing unit leaves a super finish on ABS and PVC edging and removes any discoloration on the edges, especially when working with dark edge material. Tech Specs DESCRIPTION INCH METRIC Feeding speed 16.4 FPM 5 m/min. Panel thickness 0.472~1.77″ 12~45 mm Edge thickness 0.0158″~0.0787″ 0.4 ~ 2 mm Min. panel width 4.73” 120 mm Min. panel length 9.45” 240 mm Working table height 33.7″ 856 mm Dust collection outlet dia. 2 x 4″ = 800 CFM 2 x 100 mm = 800 CFM Total connected power 4.5 HP 3.3 KW Air 6 CFM / 85 - 100 PSI 169 liters/min / 6 – 7 kg/cm2 Max. machine dimensions (LxWXH) 110″ x 61″ x 49.4″ 2780 x 1540 x 1255mm Machine weight 766 lbs. 348 kgs. Shipping dimensions (LxWxH) 89″ x 29″ x 52″ 2261 x 737 x 1321mm Shipping weight 1021 lbs. 464 kgs. Electrical requirements 230/1/60 = 30 amps 230/1/60 = 30 amps Note: 3 mm tooling is not available for this edgebander. Video Cantek MX330 Automatic Edgebander Video: Brochure Brochure
