I can't start my day without a Cappuccino! Our best selling Cappuccino is a dreamy soft brown shade. It blends seamlessly into the lash line, adding natural length and definition without looking detectable. This medium brown shade is specifically designed to complement lighter complexions and fairer hair colours, creating a soft finish without the harshness of a black lash. Set on a thin, seamless band, Cappuccino blends easily for comfortable wear and a natural-buildable look. Ideal for building subtle volume, enhancing length, or customising your lash look for day or night. Designed to be fully customisable, our Individuals let you create a lash look that’s completely your own. Add subtle definition, enhance length, or build volume exactly where you want it. Made using the most advanced faux lash technology in the industry, they feature a C+ curl for a lifted effect, seamless and comfortable lash bands, and a reusable design so you can wear them again and again. Cappuccino contains 4 rows of clusters, allowing you to get up to 6 full applications out of each box. Lengths : 8mm, 10mm, 12mm, 14mm. Contains 40 reusable cluster lashes. Why you need to try our Individual Lashes:- Soft C+ curl for a lifted look- Customisable for any eye shape- Seamless, lightweight wear- Reusable with proper care- 100% customisable For the black version of Cappuccino, shop Très Chic. Adhesive not included. Pair with our viral Invisi-Lash adhesive to lock your lashes in for up to 7 days, or use our Lash Glue for daily wear. When using daily lash adhesive, these lashes can be placed on top or underneath your natural lashes depending on personal preference. If using Invisi-Lash, individuals must be placed underneath the lash line. You can re-use your Individual Lashes! Once you've removed your lashes, clean them thoroughly using our Lash Cleansing Kit. Allow the clusters to dry, and you can reuse these with Invisi-Lash adhesive or Strip Lash adhesive. How To Apply With Regular Lash Adhesive: 1. Using your fingers or tweezers, gently loosen and peel the lash from the tray. Grip the lash as close to the base as possible. 2. Coat the base of your cluster in a small amount of glue. Wait up to 60 seconds for the glue to go tacky before applying. 3. Hover the cluster into position, then gently lower and place the lash onto your lash line. Secure with tweezers and repeat on both eyes until complete. 4. Continue to apply until you have achieved your desired look. With Invisi-Lash Adhesive: Before applying make sure your lashes are makeup and oil-free, and completely clean and dry. We recommend working on one eye at a time when applying Invisi-Lash.Patch Testing : We recommend completing a patch test before using Invisi-Lash. Simply apply a small amount of Invisi-Lash Bond to a small section of outer corner lashes and wait for 24 hours. If you experience any reactions/sensitivity, please discontinue use.1. Brush a light coat of "Bond" from the Invisi-Lash Adhesive on your natural lashes. Focus the adhesive where the base of the cluster will connect with your natural lashes. If you are going for a more dramatic cluster you may need to take the adhesive further up the lash for a stronger hold. You do not need to brush the adhesive all the way up your lash. Do not apply mascara prior to using our Invisi-Lash.2. Once the bond is applied, wait for 30 seconds for the bond to go tacky.Tatti Tip! We recommend working in sections, from either the outer corner of your eye or the inner corner of your eye, working across your lash line. Working in sections will give you time to apply the bond and clusters flawlessly.Once you have completed one section, you can then apply the bond to the next section and repeat. If your lashes are going too sticky after applying the bond, you may be applying too much. We recommend just 1 coat of bond.3. Gently loosen and peel your cluster from the tray using your fingers. We recommend loosening the cluster as close to the root as possible before removing from the tray. 4. Using your lash applicator, pick up your cluster from the end section of the lash (not the base). Place the cluster underneath your natural lashes and lift the lash cluster against the root of your natural lashes, using an up and out motion. Make sure no adhesive is on the tweezer as this will stick to the lash cluster. If you have glue on the tweezer, make sure to clean this off in between lash applications as it can stick to the cluster and the tweezers. We love our Adhesive Wipes for this.Tatti Tip! We recommend using a tweezer that you feel most comfortable with for the application of lash clusters. Make sure your applicator does not have glue on it for an easy application. We recommend wiping the applicator down regularly if glue build up does occur.Once you have applied all lashes to the eye you're working on, continue to step 4.4. Apply the 'Seal' using a dabbing motion to the upper and lower sides of your finished lashes. Do not brush or pull the wand through your lash clusters. The seal will eliminate any sticky residue and cure the adhesive bond. Only seal the lashes where you've applied the Bond, taking care to avoid the tips of the lash clusters. Wait 5 minutes to let the cure work it's magic. Repeat this step if you feel the bond is still sticky/tacky. Be careful not to apply the cure all the way through the lash cluster as it can leave a residue and cause the clusters to go hard and clump together.5. Once your lashes are set in place, use your Curved Invisi-Lash Applicator and firmly clamp your lashes to ensure they are secure and locked into place. Make sure you wipe down your lash applicator so there isn't any black bond on it prior to clamping. When clamping, focus on the base of your natural lash line where the lash clusters are bonded to, as this will ensure your lashes will not lift or move, giving a long lasting finish (just like lash extensions!)We recommend keeping your lashes away from water and steam for 24 hours after application, just like you would with lash extensions.
Related
Related
Related
Related