4T65E TH125C Converter Hub Bushing Automatic Transmission [82-UP]

REMCO TRANSMISSION PARTS Verified independent store

→

When the converter hub bushing wears out in a 4T65E or TH125C unit, the result is more than a loose fit: the converter can shift laterally under load, cutting into the pump seal an d triggering a leak that mechanics often chase to the wrong source. This single converter hub bushing, SKU CBV-033301, addresses that specific failure point directly, without extras you may not need.This is a bushing application under the TH125 model line, covering automatic transmission units built from 1982 forward across the 4T65E and TH125C designations. It ships as one individual piece, not a kit, so the order matches the repair: if you need only the bushing, that is exactly what arrives.At REMCO, parts like this one are pulled, inspected, and packed one by one rather than arriving pre-assembled from an outside source. A piece list accompanies every shipment, so the technician receiving the part can verify what is in the box before the job begins. That process has been part of how REMCO has handled automatic transmission components since 1991.What this listing does not cover: it contains no seals, no pump components, no gaskets, and no additional hardware. If your repair calls for a seal kit or a broader rebuild set, that would be a separate order. The converter hub bushing is the entire contents here.Before placing the order, confirm two things: first, that your unit carries the 4T65E or TH125C designation, and second, that the build year is 1982 or later. The part number is CBV-033301 and weighs approximately 1 lb. Matching those details to your unit is the fastest way to confirm this is the right piece for your bench. Restores proper converter hub alignment and prevents premature wear caused by a worn or loose bushing in 4T65E and TH125C units. This listing is for a single bushing only. It does not include seals, gaskets, clutch packs, filter, or any other components. Verify your specific need before ordering. The converter hub bushing sits at a critical wear point: a worn piece here allows lateral movement that damages the pump seal and accelerates converter wear, making this a small part with a large impact on unit longevity. Contents: one converter hub bushing. Article weight: 1 lb. Part number CBV-033301. Sourced and inspected individually before shipment. Before ordering, confirm your transmission code is 4T65E or TH125C and that your build year falls within the 1982-and-up application range. Match the part number to your unit. Show more