A904 A500 bushing direct drum (rear) l1992-up Automatic transmission

REMCO TRANSMISSION PARTS Verified independent store

→

A worn direct drum rear bushing in an A500, A904, A998, or A999 automatic transmission allows the drum to move off axis, and that small amount of unwanted movement is enough to acc elerate clutch pack wear and cause erratic apply feel. This listing covers that one bushing, for that one location, so you can source it without paying for components you already replaced or do not need.The A904 family has been in service since 1968, and the A500 extended that platform further, which means there are units from many different model years still being rebuilt today. This bushing covers the full production run from 1968 forward, so year range is not a limiting factor for most jobs on these transmissions.What you receive is a single direct drum rear bushing, SKU CBV-12046C, weight 1 lb. There are no seals, no thrust washers, no filter, no friction discs, and no steels in this listing. REMCO pulls and checks each part individually against the item record before it leaves the facility, and the package identifies the part inside, so there is no guessing when it arrives at your bench.Before placing the order, confirm two things: that your unit is coded A500, A904, A998, or A999, and that the position you need is the rear bushing of the direct drum specifically. Other drum positions and other bushings in this transmission family are separate parts. Ordering the correct bushing by position saves time and avoids a return. Restoring proper drum support eliminates excessive end play and prevents premature clutch pack wear caused by a worn rear bushing in the direct drum. This listing covers one bushing only. No seals, no thrust washers, no rebuild kit. Verify you need specifically the direct drum rear bushing before ordering. The direct drum rear position is a known wear point in A500 and A904 family units. Replacing this single bushing addresses that precise location without buying parts you already have. Contents: 1 direct drum rear bushing. Article weight: 1 lb. SKU CBV-12046C. Part is picked and checked against the item record before it ships out of the REMCO facility. Before ordering, confirm your transmission code is A500, A904, A998, or A999 and that the bushing needed is the rear position of the direct drum, not the front or any other drum. Show more