The Crossover Calibrator. Use to accurately set High Pass, Low Pass, BandPass, Infrasonic (subsonic) crossovers in amplifiers and processors. Can also do Gain Matching of amplifiers to 0.01dB !! The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. It can also be useful for matching gains on multiple amplifier competition type systems. What is included? The Crossover Calibrator (CC-1) Protective silicon rubber boot Calibrated Test tone CD Harness This manual Pride of ownership About the design When you pick up the CC-1, know that you are holding a precision piece of equipment. If treated as such it should provide you with many years of reliable service. We have chosen a 9V battery as a power source for a few reasons: They are readily available Isolating the CC-1 from the vehicle’s electrical system for power, guarantees that it will only measure what it is supposed to measure; the audio signal, not noise in the charging system We also chose an RCA input connector for a few reasons: It makes it pretty easy to measure the output of a headunit directly, if you choose to do so Should the harness become damaged it is easily replaceable or repairable in the field Specifications Everyone hides these in the back of the book. We are proud of our specs, they aren’t lies, so we are putting them up front. The Crossover Calibrator’s circuitry is digital microprocessor controlled Crossover -3dB point accuracy +/- 0.25dB Gain matching accuracy +/- 0.10dB Low Battery LED trigger battery voltage < 6.5Vdc Auto-shut off timer 8 - 10 minutes after ON button is pressed Shipping Box 9 x 6 x 2 inches, 2 lbs Documentation: Owner's Manual (PDF) Test Tracks: CC-1 Test Track Disc A Part 1 Part 2 Part 3 CC-1 Test Track Disc B Part 1 Part 2 Part 3 Videos ***See the CC-1 in action*** (Youtube)
